Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 101

• When selecting Disable in Roll paper auto feed. 1. Tap area. 2. Tap Load paper or Replace paper, check message that appears, and then tap Yes. Note • When loading in the lower feed slot, tap area. • If cut sheet or another roll is fed, a message is displayed asking you to remove it first. After following the instructions on the screen to remove the paper, redo the operation. • If roll paper is loaded but not fed, a message asking whether or not to feed the roll paper is displayed. Tap Replace paper, remove the paper, and go to the next step. 2. Open roll cover 1. 3. Hold flanges (A) so that holder stopper is on left, slowly place roll holder on open roll cover. 101