Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 870
Lines are printed too thick or thin in HP-GL/2 print jobs
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 870 highlights
Lines are printed too thick or thin in HP-GL/2 print jobs Check 1 Check the Width setting in Pen setup menu. Select Pen setup, then select Define palette, and change the Width setting of each pen in each palette. Print settings Check 2 Check the Width correction setting. Change the Width correction setting in the touch screen menu. Print settings Check 3 Is Adjust faint lines set to OFF? If fine lines are printed faintly, setting Adjust faint lines to ON will print the lines more distinctly. Print settings 870
Lines are printed too thick or thin in HP-GL/2 print jobs
Check 1
Check the
Width
setting in
Pen setup
menu.
Select
Pen setup
, then select
Define palette
, and change the
Width
setting of each pen in each palette.
Print settings
Check 2
Check the
Width correction
setting.
Change the
Width correction
setting in the touch screen menu.
Print settings
Check 3
Is
Adjust faint lines
set to
OFF
?
If fine lines are printed faintly, setting
Adjust faint lines
to
ON
will print the lines more distinctly.
Print settings
870