Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 910
Changing the media type in the print job
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 910 highlights
1061 Cause The media type specified in the print job is not the same as the media type loaded in the printer. What to Do Tap OK on the touch screen to go to the next screen. Check the displayed media type and size, and tap OK. • Printing again according to the media type Follow the steps below to match the media type in the print job and the media type loaded in the printer. ◦ Changing the media type in the print job 1. Tap Cancel to stop printing. 2. Change the media type in the print job settings to the media type loaded in the printer, and then try again. Loading and Printing on Rolls Loading and Printing on Sheets ◦ Replacing paper 1. Tap Replace the paper and print. 2. Load the paper with the media type specified in the print job, and then try again. Loading and Printing on Rolls Loading and Printing on Sheets • Printing with the current print settings To continue printing, tap Print with the loaded paper. on the touch screen. However, note that this error may cause paper jams and affect the printing quality. 910