Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 826
Print Quality, Set priority, Prioritize length accuracy
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 826 highlights
Note • When Auto (Use Printer Settings) is selected for the media type, printing is performed with the media type loaded in the printer. • Click Get Information to reflect the paper information set in the printer to the printer driver. Printing with Easy Setup Check 3 Does the paper loaded on the printer match the media type selected on the touch screen? Select the correct media type in the touch screen menu when loading paper in the printer. Loading Rolls in the Printer Loading Sheets in the Printer Check 4 Has the paper feed rate been calibrated properly? Adjust the feed amount. Adjusting Feed Amount Check 5 Low Print Quality setting causing lines in the printing Follow the steps below to set Print Quality to the highest quality setting, and then print. • Windows Change the Print Quality settings in the printer driver Advanced Settings. Changing the Print Quality and Correcting Image Data (Windows) • macOS Change the Print Quality in the printer driver Quality & Media settings. Changing the Print Quality and Correcting Image Data (macOS) Check 6 Is Set priority in the touch screen menu set to Prioritize length accuracy? Setting Set priority to Prioritize print quality and adjusting the feed amount can help. Adjusting Feed Amount Check 7 Check if the Print head is in the right position Adjust the Print head position. Automatic Adjustment to Straighten Lines and Colors Check 8 Print job may have been interrupted while receiving, and therefore not printed at a fast frame rate Exit other applications and cancel other print jobs. Check 9 Make sure that lines are not printed around 100 mm from the paper edges. If the printer is on standby or if you leave paper as it is for approximately over 30 minutes, paper may be curled or wrinkled. 826