Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 820

Clean any dirt or paper dust from the inside of the roll cover with a completely wrung out damp cloth, and then dry with a soft dry cloth. Check 6 If using plain papers, is the media type set to Plain papers? Set the media type to PlainP(Quick-dry) or PlainP(Instant-dry) for improved quick-drying. Changing the Type of Paper Check 7 Does this paper take longer to dry? Increase the length of the Pause between pages and Pause between scans settings from the touch screen menu. Menu Structure Note • When printing on paper that takes longer to dry, the paper may curl during printing and come in contact with the output tray. In such situations, set an Ink drying wait time and an Ink drying target area for Pause between scans in the touch screen menu. However, note that printing will now take longer. Menu Structure Check 8 Has cleaning been performed? Clean the inside of the printer by loading paper that is wider than the dirty paper. If one cleaning does not help, perform cleaning again. Cleaning Inside the Printer Check 9 When the paper is output from the top, did you clean the inside of the transport unit cover? If ink adhesion still remains after cleaning, the protrusions inside the printer may be dirty. Open the transport unit cover, and then thoroughly wipe off the ink inside the transport unit inner cover. Cleaning Inside the Transport Unit Cover Check 10 Is the output location set to the top? Switch the output location to the front. Refer to the following for how to switch the output location. Specifying the Output Location for Rolls Refer to the following for how to use the basket when outputting to the front. Using the Basket on the Front of the Printer Note • If the platen is dirty, open the top and inner covers to clean the platen. • In a hot and humid environment, rolling paper printed with images containing areas of saturated color may transfer ink to the contact surface, affecting print quality. 820