Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 831
Image edges are blurred or white banding occurs
![]() |
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 831 highlights
Image edges are blurred or white banding occurs Check 1 Paper may be gripped too strongly over the platen. Set a lower Transport unit vacuum strength in the touch screen menu. Adjusting Vacuum Strength Check 2 Check if the Print head is in the right position. For detailed printing of small text or fine lines on glossy or semi-gloss photo paper or proof paper, etc., set the Print head to the optimal height and then adjust the position of the Print head. Adjusting the Print Head Setting a lower value for Paper thickness (head height) in the touch screen menu may resolve the problem. Troubleshooting Paper Abrasion and Blurry Images Check 3 Is the media type specified in the printer driver the same as the media type loaded in the printer? When printing with the media type specified in the printer driver, load the specified media type in the printer. Loading Rolls in the Printer Loading Sheets in the Printer When printing with the media type specified in the printer driver, load the specified media type in the printer. 1. To stop printing, tap Stop. 2. Change the paper type in the printer driver and try printing again. Note • When Auto (Use Printer Settings) is selected for the media type, printing is performed with the media type loaded in the printer. 831
![](/manual_guide/products/canon-imageprograf-tz30000-imageprograf-tz30000-tz5300-series-user-manual-8e824a3/831.png)