Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 414
Adjusting Line Misalignment
![]() |
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 414 highlights
Adjusting Line Misalignment If printed lines are misaligned, execute Print head angle adjustment to adjust the print head angle. Print head angle adjustment requires you to examine a printed test pattern and adjust the angle using the angle adjustment lever. Always adjust the print head angle after replacing the print head. Important • Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of paper as you will use for printing. • Remove any printed documents from the top delivery tray before starting. Removing Printed Documents from the Top Delivery Tray Paper to Prepare When using rolls An unused roll at least 10.00 in. (254.0 mm) wide When using sheets One sheet of unused paper of at least A4/Letter size Perform adjustment as follows. 1. Load paper. Loading Rolls in the Printer Loading Sheets in the Printer Important • Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment cannot be completed correctly unless the loaded paper matches the settings. 2. Attach the basket. Using the Basket on the Front of the Printer 3. Tap Maintenance on HOME screen. Home Screen Menu Composition The Maintenance screen appears. 4. Tap Print head angle adjustment. A confirmation message appears. 5. Tap Yes. The carriage moves and instructions for the print head angle adjustment procedure appears on the touch screen. 414
![](/manual_guide/products/canon-imageprograf-tz30000-imageprograf-tz30000-tz5300-series-user-manual-8e824a3/414.png)