Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 152
Reducing Dust from Cutting Rolls
![]() |
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Reducing Dust from Cutting Rolls If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting Cut-dust reduction to ON from the touch screen menu, which will coat the leading and trailing edges of the printed document with ink. As a result, you can reduce problems with the print head. You can set Cut-dust reduction according to the media type. Important • Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight paper. If not cut properly, the paper may jam. • Borderless printing is not available when Cut-dust reduction is set to ON. When performing borderless printing, set Cut-dust reduction to OFF. Follow these steps to set Cut-dust reduction to ON. 1. Tap paper settings display area on Home screen of touch screen. Note • If the Home screen does not appear, tap the HOME button. 2. Tap or area. 3. Tap Paper settings. 4. Tap Advanced. 152
![](/manual_guide/products/canon-imageprograf-tz30000-imageprograf-tz30000-tz5300-series-user-manual-8e824a3/152.png)