Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 430

Automatic Banding Adjustment If printed images are affected by banding in different colors across the sheet, execute Adjust print quality for automatic adjustment of the paper feed amount. The printer prints and reads a test pattern for automatic adjustment of the feed amount. • This can be adjusted for each output destination. Adjusting Feed Amount (Top) Adjusting Feed Amount (Front) Important • When using highly transparent media, use manual adjustment. Manual Banding Adjustment Note • We recommend executing the adjustment if you have changed the paper type or paper size. • Always check the Set priority values. Selecting Feed Amount Adjustment Method • If additional fine-tuning is necessary, execute Paper feed fine adjustment. Fine-Tuning Paper Feed Amount • Use Adjust feed length to ensure that lines in CAD drawings are printed at exactly the right length. Adjusting Line Length • This may take some time, depending on the type of paper. Adjusting Feed Amount (Top) Items to Prepare When Using Rolls An unused roll at least 254.0 mm (10.00 in) wide Follow the procedure below to adjust. 1. Load paper. Loading Rolls in the Printer 2. Flick HOME screen and tap Maintenance. Home Screen Menu Composition 3. Tap Paper feed adjustment. 4. Tap Adjust print quality (top). 5. Tap Auto. 430