Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 701

Quality & Media This dialog allows you to create a basic print setup in accordance with the paper type. Unless special printing is required, normal printing can be performed just by setting the items in this dialog. Media Type Select the type of media to be used. You must select the type of media actually loaded in the printer. This selection enables the printer to carry out printing properly for the material of the media used. Note • After updating media information of the printer, start up the Canon IJ Printer Utility2 and update media information. Paper Source Select the source from which paper is supplied. Roll Paper (Auto) Depending on the paper settings on the printer driver and the paper information registered to the printer, the printer automatically determines which roll paper to use and then feeds that paper. Roll 1 Paper is fed from Roll 1. Roll 2 Paper is fed from Roll 2. Cut Sheet Feeds paper using the cut paper. Output location Select the paper output location. Top and Front are not set in printer settings, but are selected when configuring settings individually. 701