Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 249
While feeding
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
◦ Disable Switches the roll paper for printing by estimating the remaining amount based on the roll amount value you entered. In addition, if the roll length is not specified properly, paper may remain when switching, or it may have run out while printing is in progress. • Roll paper auto switching Enables/Disables switching roll paper feed position by detecting the paper size. • Detect paper setting mismatch Selects printer action when you start printing with the paper size, the media type, and print settings different from those registered. • Paper retention settings Selects whether to contact the roll nip with the rolls in feeding paper. ◦ If you select While feeding, the roll nip contacts with the rolls and automatic feeding is enabled. ◦ If you select Release, the roll nip does not contact with the rolls. If you select Release, automatic feed and automatic switching of top and bottom roll paper can not be performed. Feed paper manually. • Advanced paper settings Performs advanced paper settings for each media types. • Paper size recognition settings Selects which size is preferred when paper size detection is enabled. ◦ Cut sheet setting 1 Select whether ISO A3+ or 13"x19"(Super B) is applied when a sheet of an intermediate size is detected. ◦ Roll paper setting 1 Select whether B4 or 10 in. is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 2 Select whether A3 or 300 mm is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 3 Select whether 300 mm or 12 in. is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 4 Select whether 500 mm or 20"x24" is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 5 Select whether B2 or 20"x24" is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 6 Select whether A1 or 600 mm is applied when a roll of an intermediate size is detected. 249