Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 251
Auto maintenance settings
![]() |
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Auto maintenance settings Select this setting item from Printer settings. Important • The administrator password is required to change settings if it is enabled for changing settings using the operation panel. • Auto nozzle check Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic nozzle checking. • Nozzle check error display Enables/Disables displaying the nozzle check error. • System Cleaning frequency Specifies the frequency of automatic system cleaning. Note • To maintain print quality, we recommend you select Short if you use the printer at a higher place. • Print pattern after new head Selects whether you print an adjustment pattern after replacing the Print head. 251
![](/manual_guide/products/canon-imageprograf-tz30000-imageprograf-tz30000-tz5300-series-user-manual-8e824a3/251.png)
Auto maintenance settings
Select this setting item from
Printer settings
.
Important
•
The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
•
Auto nozzle check
•
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
•
Nozzle check error display
•
Enables/Disables displaying the nozzle check error.
•
System Cleaning frequency
•
Specifies the frequency of automatic system cleaning.
Note
•
To maintain print quality, we recommend you select
Short
if you use the printer at a higher place.
•
Print pattern after new head
•
Selects whether you print an adjustment pattern after replacing the Print head.
251