Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 812

If not loaded properly, paper can buckle and rub against the Print head. Reload the paper. Loading Rolls in the Printer Loading Sheets in the Printer Check 4 Is the Print head height set too low? Set Paper thickness (head height) in the touch screen menu to Auto. Troubleshooting Paper Abrasion and Blurry Images Check 5 Is the paper thick, or a type that curls easily or is prone to buckling after absorbing ink? If using paper-based printing material such as Heavyweight Coated Paper, set Transport unit vacuum strength in the touch screen menu to Medium-strong or Strong. If that does not resolve the problem, increase the Paper thickness (head height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images If using film-based printing material such as CAD Tracing Paper, set the Transport unit vacuum strength in the touch screen menu to Standard, Medium-strong, or Strong. If that does not resolve the problem, increase the Paper thickness (head height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images If using paper thinner than 0.004 inches (0.1 mm), set Transport unit vacuum strength in the touch screen menu to Weak. If that does not resolve the problem, increase the Paper thickness (head height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images Check 6 Does the paper have a strong curl at the front edge or is it buckled? Set Cutting mode in the touch screen menu to User cut, and set leading edge detection to Do not detect. To keep track of the amount of roll paper remaining, set Manage remaining roll amount to Auto estimate or Disable before loading the roll paper, and then restore the setting of Manage remaining roll amount to Auto estimate or Barcodes after the roll paper is loaded. In addition, set Media type selection method to Manual or Use current media type. Specifying the Cutting Method for Rolls Keeping Track of the Amount of Roll Paper Left Check 7 When removing a paper from the top delivery tray, have you removed all the paper? 812