Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 806

Printing stops and an error message is displayed Check 1 The roll paper may have been run out during printing. The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Remove the used roll and insert a new roll. Loading Rolls in the Printer Loading and Printing on Rolls Check 2 When removing a paper from the top delivery tray, have you removed all the paper? It is recommended that you remove all printed documents on the tray when removing them. Returning the printed documents to the tray may cause paper jams. Removing Printed Documents from the Top Delivery Tray Check 3 Is the output location set to the top? When ejecting from the top, the paper may jam depending on the printed image, paper width, temperature and humidity. In this case, switch the output location to the front. Specifying the Output Location for Rolls 806