Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 90

Paper Sizes Rolls Rolls that meet the following conditions are supported. • Outer diameter is 6.9 inches (175 mm) or less • Inner diameter of paper core: 2 or 3 inches • Printing side out Roll Paper Width 36.11 in. (917.0 mm) to 8.00 in. (203.2 mm) Roll paper width recommended for borderless printing(*1,*2) 36 in Roll (914.4mm) A0/A1 Roll (841.0mm) B1/B2 Roll (728.0mm) 24 in Roll (609.6mm) A1/A2 Roll (594.0mm) B2/B3 Roll (515.0mm) 17 in Roll (431.8mm) 14 in Roll (355.6mm) 10 in Roll (254.0mm) Minimum Paper Length Front output: 8.00 in. (203.2 mm) Top output: 8.08 in. (205.0 mm) Maximum Printable Length 59 feet (18 m) depends on the OS and application. Thickness 3 mil (0.07 mm) to 31 mil (0.8 mm) *1:Borderless printing may not be available depending on the media type. For details on media types that can be used for borderless printing, see "Paper Information List." *2:You can perform borderless printing without specifying Roll paper width recommended for it. As opposed to standard borderless printing, there will be a small margin on the left and right because the paper width is set a little bit smaller than the width of the document. Sheets Sheets of the following sizes are supported. Sheet Width Minimum Paper Length Maximum Printable Length Thickness 36.11 in. (917.0 mm) to 8.00 in. (203.2 mm) 8.00 in. (203.2 mm) 24.02 in. (610.0 mm) 3 mil (0.07 mm) to 31 mil (0.8 mm) 90