Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 651
Cutting Roll Paper after Printing
![]() |
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 651 highlights
Cutting Roll Paper after Printing The procedure for cutting roll paper automatically and printing cut guidelines is as follows: 1. Select Advanced Paper Settings from the pop-up menu of the Print Dialog 2. Setting Auto Cut From Automatic Cutting, select the setting that matches your purpose. Yes The roll paper is cut automatically after printing. None The roll paper is not cut after printing. Print Cut Guideline Cut guidelines are printed for cutting the roll paper manually after printing. Note • The default setting for automatic cutting is Yes. Important • If None or Print Cut Guideline is selected, paper will be output from the front. We recommend that you set a basket before printing. 3. Complete the setup Click Print. When you print, the status after printing is set to whatever was set in Automatic Cutting. 651
![](/manual_guide/products/canon-imageprograf-tz30000-imageprograf-tz30000-tz5300-series-user-manual-8e824a3/651.png)