Canon imagePROGRAF iPF6400 Basic Guide - Page 100

The printer stops during a print job, An error message is shown on the Display Screen

Page 100 highlights

An error message is shown on the Display Screen iPF6400 The printer stops during a print job An error message is shown on the Display Screen 100 The printer ejects blank, unprinted paper ...100 An error message is shown on the Display Screen Cause An error message is displayed during printing. The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Corrective Action Check the error message and take action as necessary. (See "Error Messages.") →P.139 Remove the used roll and insert a new roll. (See "Removing the Roll from the Printer.") →P.14 (See "Removing Rolls From the Roll Holder.") →User's Guide (See "Loading and Printing on Rolls.") →User's Guide The printer ejects blank, unprinted paper Cause The leading edge of the roll paper was cut to straighten it. The Printhead nozzles are clogged. Corrective Action The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other than Off in the Control Panel menu. (See "Cutting the Leading Edge of Roll Paper Automatically.") →User's Guide Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (See "Checking for Nozzle Clogging.") →User's Guide A print job was received from an incompatible printer driver. The printer is damaged. Use the correct imagePROGRAF printer driver for the printer and try printing again. Contact your Canon dealer for assistance. Troubleshooting The printer stops during a print job 100 Basic Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142

The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen
.......................................................................................
100
The printer ejects blank, unprinted paper
.........................................................................................................
100
An error message is shown on the Display Screen
An error message is shown on the Display Screen
Cause
Corrective Action
An error message is displayed during printing.
Check the error message and take action as necessary.
(See "Error Messages.")
→P.139
The last portion of roll paper was used during a print job, and paper
could not be advanced because the trailing edge is taped to the roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
→P.14
(See "Removing Rolls From the Roll Holder.")
→User's Guide
(See "Loading and Printing on Rolls.")
→User's Guide
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Cause
Corrective Action
The leading edge of the roll paper was
cut to straighten it.
The leading edge of rolls may be cut to straighten it if
Trim Edge First
is set to a value other
than
Off
in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
→User's Guide
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and make sure the Printhead is in good condition for
printing.
(See "Checking for Nozzle Clogging.")
→User's Guide
A print job was received from an in-
compatible printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer is damaged.
Contact your Canon dealer for assistance.
An error message is shown on the Display Screen
iPF6400
Basic Guide
Troubleshooting
The printer stops during a print job
100