Canon imagePROGRAF iPF6400 Basic Guide - Page 123
This paper cannot be used., Roll printing is selected., but manual paper is loaded.
View all Canon imagePROGRAF iPF6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
iPF6400 Cause The printer has received a print job longer than the amount of roll paper left when ManageRemainRoll in the Control Panel menu is On. This paper cannot be used. Corrective Action Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. This paper cannot be used. Cause Paper that is too large for the printer has been loaded. Paper that is too small for the printer has been loaded. Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Corrective Action Press the OK button and load paper of the correct size. (See "Paper Sizes.") →User's Guide Press the OK button and load paper of the correct size. (See "Paper Sizes.") →User's Guide Press the OK button and load unused paper A4/Letter (vertical) or larger. More than one sheet may be required depending on the adjustment. Error Message Roll printing is selected. Cause You have attempted to print on a roll, but no roll is loaded. Corrective Action Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll, and then print. (See "Loading Rolls on the Roll Holder.") →P.9 (See "Loading Rolls in the Printer.") →P.11 Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. Messages regarding paper Roll printing is selected, but manual paper is loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Follow these steps to load and print on a roll. 1. Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet. (See "Removing Sheets.") →P.23 2. Load a new roll. (See "Loading Rolls in the Printer.") →P.11 The printer now starts printing the print job. Press ▲ or ▼ to select Stop Printing, and then press the OK button. The roll is empty. Cause The roll is empty. Corrective Action Follow these steps to replace the used roll with a new roll of the same type and size. 1. Press the OK button and remove the roll. (See "Removing the Roll from the Printer.") →P.14 (See "Removing Rolls From the Roll Holder.") →User's Guide 2. Load the new roll. (See "Loading Rolls on the Roll Holder.") →P.9 (See "Loading Rolls in the Printer.") →P.11 3. If no barcode was printed on the roll, specify the type of paper. 123 (See "Changing the Type of Paper.") →User's Guide Basic Guide