Canon imagePROGRAF iPF6400 Basic Guide - Page 113
Cannot print over AppleTalk or Bonjour networks, Other/Unknown
View all Canon imagePROGRAF iPF6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
iPF6400 Cannot print over AppleTalk or Bonjour networks Cause Corrective Action The NetWare server and serv- 3. Start NWADMIN or PCONSOLE and confirm that the print service is configured correctly and the ices are not configured correctly. print queue is available. 4. If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that printer's network protocol settings. 5. If the printer is used in queue server mode, specify Other/Unknown as the printer type. The printer was turned off and on when not disconnected from the server. Leave the printer off for at least 30 seconds, and then restore power. Cannot print over AppleTalk or Bonjour networks Cause The AppleTalk protocol is not enabled on the printer. The computer you are trying to print from is not configured correctly. Corrective Action Activate AppleTalk on the printer. (See "Configuring the Printer's AppleTalk Network Settings.") →User's Guide Make sure the computer's AppleTalk settings are configured correctly. (See "Configuring the Destination for AppleTalk Networks (Macintosh).") →User's Guide (See "Configuring the Destination for Bonjour Network (Macintosh).") →User's Guide The computer and printer are not on the same network. Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router. Make sure the computer and printer are on the same network. For information about network settings, ask your network administrator. Troubleshooting Cannot print over a network 113 Basic Guide