Canon imageRUNNER ADVANCE C2230 imageRUNNER ADVANCE C2200 Srs Basic Operation - Page 123
Staple Finisher-M1/Booklet Finisher-M1 Optional, Inside the Top Cover of the Finisher
View all Canon imageRUNNER ADVANCE C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Troubleshooting Staple Finisher-M1/Booklet Finisher-M1 (Optional) Check the location of the paper jam, and follow the procedure described below, while referring to the directions that appear on the touch panel display, to remove the jammed paper. The Staple Finisher-M1, Booklet Finisher-M1, and Buffer Pass Unit-K1 are optional products. Inside the Top Cover of the Finisher 1 Remove any jammed paper in the output part. 1 2 1. Lift up the output slot. 2. Remove any jammed paper that is visible. If you cannot see any paper, check whether there is any jammed paper in the output area. If a paper jam occurs when you are printing in the Staple mode, do not remove the output sheets that are waiting to be stapled. (Printing and stapling resume after you clear the paper jam.) 2 Open the top cover of the finisher, and remove any jammed paper. 1 1 3 3 2 2 *1 Booklet Finisher-M1 *2 Staple Finisher-M1 1. Open the top cover of the finisher. 2. Remove any jammed paper. 3. Close the top cover of the finisher. When closing the cover, be careful not to get your fingers caught, as this may result in personal injury. 123