Canon imageRUNNER ADVANCE C2230 imageRUNNER ADVANCE C2200 Srs Basic Operation - Page 85

Press, cartridges

Page 85 highlights

Routine Maintenance • Use only toner cartridges intended for use with this machine. • For information on the supported Canon genuine toner, see "Consumables," on p. 98. • Do not replace toner cartridges until the message prompting you to do so appears. • Do not attempt to replace the toner cartridge while the machine is printing. • The color of the toner to be replaced is displayed on the touch panel display. If multiple toner cartridges must be replaced, replace the toner cartridges in the following order: Black, Yellow, Magenta, Cyan. • If you continue copying or printing in black-and-white after cyan, magenta, or yellow toner runs out, do not remove the depleted toner cartridges from the machine. • You can set the machine to display a message indicating that the remaining toner is low. (See e-Manual > Settings/ Registration.) • When a message that the toner is low appears, approximately 1,000 pages can still be printed. It is recommended that you get a new toner cartridge ready for replacement before the toner runs out. • Complete instructions on how to replace the toner cartridge can be accessed by pressing [Previous] or [Next] on the touch panel display. • If toner runs out during a print job, the remaining prints are made after you replace the toner cartridge. • If black toner is left, you can continue copying and printing in black-and-white. • After replacing toner cartridges, if printed colors are different from the colors printed before you replaced the toner cartridges, perform [Auto Adjust Gradation] in [Adjustment/Maintenance]. (See e-Manual > Settings/Registration.) 1 Press [ ]. If the Black toner or all of the toners run out, this step is not necessary. 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180

85
Routine■Maintenance
• Use only toner cartridges intended for use with this machine.
• For information on the supported Canon genuine toner, see“Consumables,”on p. 98.
• Do not replace toner cartridges until the message prompting you to do so appears.
• Do not attempt to replace the toner cartridge while the machine is printing.
• The color of the toner to be replaced is displayed on the touch panel display. If multiple toner cartridges must be replaced,
replace the toner cartridges in the following order: Black, Yellow, Magenta, Cyan.
• If you continue copying or printing in black-and-white after cyan, magenta, or yellow toner runs out, do not remove the
depleted toner cartridges from the machine.
• You can set the machine to display a message indicating that the remaining toner is low. (See e-Manual > Settings/
Registration.)
• When a message that the toner is low appears, approximately 1,000 pages can still be printed. It is recommended that you
get a new toner cartridge ready for replacement before the toner runs out.
• Complete instructions on how to replace the toner cartridge can be accessed by pressing [Previous] or [Next] on the
touch panel display.
• If toner runs out during a print job, the remaining prints are made after you replace the toner cartridge.
• If black toner is left, you can continue copying and printing in black-and-white.
• After replacing toner cartridges, if printed colors are different from the colors printed before you replaced the toner
cartridges, perform [Auto Adjust Gradation] in [Adjustment/Maintenance]. (See e-Manual > Settings/Registration.)
1
1
Press [
If the Black toner or all of the toners run out, this step is not necessary.