Canon imageRUNNER ADVANCE C2230 imageRUNNER ADVANCE C2200 Srs Basic Operation - Page 82
Replacing the Staple Cartridge Inner Finisher-F1
![]() |
View all Canon imageRUNNER ADVANCE C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
4  Push the saddle stitcher unit back into its original position. 1. Pull the stapler unit towards you, and then push it down into its original position. 2. Grip the handle of the saddle stitcher unit, and return it to its original position. When pushing the saddle stitcher unit back into its original position, be careful not to get your fingers caught, as this may result in personal injury. 5 Close the front cover of the finisher. When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury.  When you have replaced the staple case, be sure to manually reposition the staples in the saddle stitcher unit. (See e-Manual > Settings/Registration.) Replacing the Staple Cartridge (Inner Finisher-F1) This section describes the procedure for replacing the staple cartridge in the Inner Finisher-F1. 1 Pull out the staple case from the finisher. 2 1 1. Open the front cover of the finisher. 2. Lift and pull out the staple case from the stapler unit, holding it by the green tab. 82
![](/manual_guide/products/canon-imagerunner-advance-c2225-imagerunner-advance-c2200-srs-basic-operation-guide-631b553/82.png)