Canon imageRUNNER ADVANCE C2230 imageRUNNER ADVANCE C2200 Srs Basic Operation - Page 37
Options]■2/2, Job■Build], Sender■Name■TTI], Select■Line], Direct■Send]
View all Canon imageRUNNER ADVANCE C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Flow of Basic Operations 2 3 1 4 8 5 7 6 [Options] 2/2 1 [Job Build] You can scan originals that are too many to be placed at once, by dividing them into multiple batches. After all originals are scanned, sending is started. 2 [Sender Name (TTI)] You can register a department name or personal name in advance, and show this on the destination fax machine. * Set the Sender Name after specifying the destination. 3 [Select Line] You can select the telephone line to use for sending a facsimile. 4 [Direct Send] Check that the recipient can receive the facsimile, and then start scanning the originals. You can directly send without storing the original in the memory. 5 [Job Done Notice] Press to have the machine notify the user through e-mail when the fax job is done. 6 [Finished Stamp] You can print a stamp (approximately 1/8" (3 mm) in diameter) on the front side of scanned and sent originals. 7 [Preview] This mode enables you to preview the scanned data of your originals and to check the page count before sending a fax. You can also delete a specified page. 8 [Delayed Send] This mode enables you to store a send job in memory, and have it sent at a later time. You can specify from the current time to 23:59. Functions with this mark require an optional product(s). 37