Canon imageRUNNER ADVANCE C2230 imageRUNNER ADVANCE C2200 Srs Basic Operation - Page 83
Pull out the empty staple cartridge from the staple case°
View all Canon imageRUNNER ADVANCE C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Routine Maintenance 2 Pull out the empty staple cartridge from the staple case. 1. Press the areas indicated by PUSH on both sides of the 1 staple case. 2. Once you have released the spring-loaded case, pull out the staple cartridge. PUSH 1 2 3 Insert a new staple cartridge into the staple case. 2 1 3 1. Insert a new staple cartridge. 2. Press the spring-loaded case down until it clicks into place. 3. Remove the seal holding the staples together, by pulling it straight out. • Do not remove the seal that holds the staples together before you place the staple cartridge into the staple case. • Only one staple cartridge can be inserted at a time. • Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear. 4 Attach the staple case to the finisher. 1. Gently push the staple case back into the finisher and push down firmly until it is securely in place. 2. Close the front cover of the finisher.  When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury. After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition the staples. 83