Cisco ESR10008 Hardware Installation Guide - Page 29
Physical Characteristics, Floor Loading Considerations, Site Power Requirements
UPC - 746320761510
View all Cisco ESR10008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 2 Preparing for Installation Site Planning Table 2-2 Heat Dissipation of Cisco 10000 Series Router Chassis Type Cisco 10008 Heat Dissipation 4770 Btu/hr Physical Characteristics Be familiar with the physical characteristics of the Cisco 10008 router to assist you in placing the system in the proper location. Table 2-3 shows the weight and dimensions of the Cisco 10008 router chassis. Table 2-3 Physical Characteristics of Cisco 10000 Series Router Characteristic Height Width Depth Weight of fully configured chassis Cisco 10008 21.75 in. (55.2 cm) 17.5 in. (44.4 cm) 13.4 in. (30.4 cm) Some configurations may require 14.5 in. 130 lb (59.02 kg) Floor Loading Considerations Ensure that the floor under the rack supporting the Cisco 10008 series router is capable of supporting the combined weight of the rack and all other installed equipment. To assess the weight of the fully configured Cisco 10008 chassis respectively, refer to Table 2-3. For additional information about floor loading requirements, consult the document GR-63-CORE, Network Equipment Building System (NEBS) Requirements: Physical Protection. Site Power Requirements The Cisco 10008 router has specific power and electrical wiring requirements. Adhering to these requirements ensures reliable operation of the system. The following sections specify the electrical service and circuit requirements. Follow these precautions and recommendations when planning power connections to the Cisco 10008 router: • Check the power at your site before installation and periodically after installation to ensure that you are receiving clean power. Install a power conditioner if necessary. • Provide proper grounding to avoid damage from lightning and power surges. Caution This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. OL-0659-13 Cisco 10008 Router Hardware Installation Guide 2-3