Cisco ESR10008 Hardware Installation Guide - Page 79
Starting and Configuring the Router, Powering On the System
UPC - 746320761510
View all Cisco ESR10008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4 C H A P T E R Starting and Configuring the Router This chapter provides information on powering on the system, basic file system information, and installation troubleshooting procedures. • Powering On the System, page 4-1 • Configuring the Cisco 10008 Router at Startup, page 4-2 • Formatting Flash Memory Cards and Disks, page 4-6 • Managing the File Systems, page 4-7 • Managing System Boot Parameters, page 4-9 • Predeployment Testing, page 4-11 • Troubleshooting Installation Problems, page 4-12 Powering On the System When all of the interfaces are connected, perform a visual check of all connections and then check that: • The ejector levers on each line card are in the locked position. • All top and bottom line card retaining screws are tight. • All network interface cables are connected to the line cards. • The console terminal is turned on. • A PCMCIA flash memory card installed in the PRE. You are now ready to power on the system for the first time using the following procedure: OL-0659-13 Cisco 10008 Router Hardware Installation Guide 4-1