Cisco ESR10008 Hardware Installation Guide - Page 56
Recommended Tools and Supplies, Attaching the Grounding Cable, Quantity, Description, Comments
![]() |
UPC - 746320761510
View all Cisco ESR10008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Connecting the Chassis to Ground Chapter 3 Installing the Cisco 10008 Router Recommended Tools and Supplies Table 3-1 lists the tools, equipment, and supplies necessary to connect the system ground to the chassis. Table 3-1 Tools and Supplies Quantity 1 1 1 2 Varies 2 Varies Description Comments Number 2 Phillips screwdriver - Wire stripping tool - Crimping tool Must fit diameter of grounding lugs. 2-hole grounding lugs Recommended types: Must fit no. 6 stranded, no. 6 weld, or 37/24 flex cables. Each lug has two holes, centered 0.625 in. (1.587 cm) apart and accepts M5 screws. • Panduit no. LCD6-10-AL • Thomas & Betts no. 256-30695-1183 • Burndy no. YA6CL2TC10 Grounding wire 6 AWG, 0.1620 in. (4.1148 mm) recommended. M5 PEM screws with captive, locking washers Included in accessory kit shipped with the Cisco 10008 router. Screws to attach ground wire to grounding Part requirements depend on location. point at site Attaching the Grounding Cable The following procedure describes how to attach: • The grounding lug to the grounding cable. • The grounding cable to the chassis. • The grounding cable to the earth grounding point. Warning When you install the unit, you must always connect the ground connection first and then be sure to disconnect the ground connection last. Statement 202 3-14 Cisco 10008 Router Hardware Installation Guide OL-0659-13
![](/manual_guide/products/cisco-10008-hardware-installation-guide-4642de6/56.png)