Cisco ESR10008 Hardware Installation Guide - Page 88
Changing the Configuration Register Settings, Configuration Register Settings
![]() |
UPC - 746320761510
View all Cisco ESR10008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Managing System Boot Parameters Chapter 4 Starting and Configuring the Router Changing the Configuration Register Settings To change the configuration register settings while you are running system software, perform the following steps: Step 1 Step 2 Step 3 Step 4 Step 5 From global configuration mode, enter the config-register value command to set the contents of the software configuration register; value is a hexadecimal number preceded by 0x. For example: Router(config)# config-register 0x2100 Consult the hexadecimal column in Table 4-2 for the possible settings to enter as the 4-bit value parameter. Exit global configuration mode by pressing Ctrl-Z. Router(config)# Ctrl-Z Router# The new contents of the software configuration register are saved to NVRAM. These new settings do not take effect until you reload the system or reboot the router. To display the new software configuration register setting, issue the show version command. Router# show version . . . #Configuration register is 0x141 (will be 0x2100 at next reload) Save the configuration file to preserve the new software configuration register settings. Router# copy running-config startup-config Reboot the router. The software configuration register setting takes affect only after you reload the system. This happens when you issue the reload command from the console or reboot the router. Configuration Register Settings Table 4-2 summarizes the modifications that you can make to the software configuration register. For detailed information, refer to the Cisco IOS Configuration Fundamentals Command Reference. Note The factory default value for the software configuration register is 0x2102. This value is a combination of the following: binary bit 8 = 0x0100, bits 00 through 03 = 0x0002, and bit 13 = 2000. 4-10 Cisco 10008 Router Hardware Installation Guide OL-0659-13
![](/manual_guide/products/cisco-10008-hardware-installation-guide-4642de6/88.png)