Cisco ESR10008 Hardware Installation Guide - Page 73

Chapter 3 Installing the Cisco 10008 Router Connecting a Video Terminal to the PRE Console Port Figure 3-31 Console Port Connection on the PRE Module CISCO 10000 CONSOLE AUX LINK ELITNHKERNET SSLLOOTT01 30027 30028 Step 1 Step 2 Connect one end of the RJ-45 crossover cable to the serial RJ-45 port (CON) on the PRE module (Figure 3-31). Run the cable up and through the cable management bracket and connect the other end of the RJ-45 crossover cable to the RJ-45 adapter (Figure 3-32). If your terminal is equipped with a: • DB-25 serial connector, use the RJ-45-to-DB-25 adapter. • DB-9 serial connector, use the RJ-45-to-DB-9 adapter. Figure 3-32 Connecting an RJ-45-to-DB-9 Console Cable Adapter Step 3 Step 4 Step 5 Connect the adapter to your video terminal to complete the cable connection. Power on your video terminal. Configure your video terminal to match the following default console port settings: • 9600 baud • 8 data bits • No parity generation or checking • 1 stop bit • No flow control OL-0659-13 Cisco 10008 Router Hardware Installation Guide 3-31