Cisco ESR10008 Hardware Installation Guide - Page 71
Alarm Terminal Block Connections, Step 5
UPC - 746320761510
View all Cisco ESR10008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 3 Installing the Cisco 10008 Router Figure 3-29 Alarm Terminal Block Connections Connecting Alarm Indicators ALARMS 50VA SELV max NC COM MINOR NO NC COM MAJOR NO NC COM CRITICAL NO 32694 Step 5 Step 6 Step 7 Repeat steps 3 and 4 for any remaining alarm indicators. Secure the power cabling to the chassis by feeding a tie wrap through the slot on the side of the chassis and binding the wires (see blowout in Figure 3-30). Replace the rear safety cover, making sure that the alarm indicator wires exit through the hole on the side of the cover (Figure 3-30). OL-0659-13 Cisco 10008 Router Hardware Installation Guide 3-29
3-29
Cisco 10008 Router Hardware Installation Guide
OL-0659-13
Chapter 3
Installing the Cisco 10008 Router
Connecting Alarm Indicators
Figure 3-29
Alarm Terminal Block Connections
Step 5
Repeat steps 3 and 4 for any remaining alarm indicators.
Step 6
Secure the power cabling to the chassis by feeding a tie wrap through the slot on the side of the chassis
and binding the wires (see blowout in
Figure 3-30
).
Step 7
Replace the rear safety cover, making sure that the alarm indicator wires exit through the hole on the
side of the cover (
Figure 3-30
).
32694
MINOR
MAJOR
CRITICAL
ALARMS
50VA
SELV max
NC
COM
NO
NC
COM
NO
NC
COM
NO