Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0
Dell Brocade 6520 Manual
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Brocade 6520 manual content summary:
- Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 1
53-1002750-01 ® 14 December 2012 Fabric OS MIB Reference Supporting Fabric OS v7.1.0 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 2
March 2002 Added Brocade-specific Entity April 2003 and HA-MIBs. Added FICON information. May 2003 53-0000521-04 Revised FICON information. October 2003 53-0000521-06 53-0000521-08 Updated to support the Brocade 3250, 3850, and 24000 switches. Updated to support the Brocade 4100. December - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 3
Backbone Director. October 2007 Updated to support the Brocade 300, 5100, and 5300 switches. March 2008 Updated to support the November 2008 Brocade DCX-4S and Brocade Encryption Switch. Updated to support the Brocade 7800 Extension Switch, Brocade 8000 Switch, FCOE10-24 DCX Blade, and FX8 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 4
extension MIB, SNMPv2 MIB, ipAddressTable, MIBs for swConnUnitPortStatExtention Table, and switch traps. April 2011 Updated to support Brocade 6505, Brocade 6520, and Brocade VA-40FC. Added swDeviceStatusTrap, swConnUnitPCSErrorCounter, and swConnUnitPortTable. Updated the MIB objects - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 5
SNMP CLI usage 11 Access Gateway and Brocade MIBs 19 Firmware upgrades and enabled traps 20 Fabric OS commands for configuring SNMP 20 Support for Administrative Domains 23 Support for Role-Based Access Control 23 Support for IPv6 addressing 23 Support for Virtual Fabric 23 Customized traps - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 6
Chapter 2 Chapter 3 Chapter 4 MIB-II (RFC1213-MIB) MIB II overview 25 MIB-II object hierarchy 25 Textual conventions 32 Objects and types imported 32 System group 32 Interfaces group 34 AT group 38 IP group 38 ICMP group 43 TCP group 45 UDP group 47 EGP group 48 Transmission group 48 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 7
MIB overview 123 SW-MIB system organization of MIB objects 123 Textual conventions for SW-MIB 132 sw traps 135 Switch system group 141 Switch Fabric group 149 Switch agent configuration group 151 Fibre Channel port group 152 Name Server database group 156 Event group 158 Fabric Watch group - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 8
Chapter 10 Toptalker group 173 CPU or memory usage group 174 Switch connectivity unit port statistics extension table 175 High-Availability MIB FCMGMT-MIB 203 Connectivity unit group 204 Statistics group 225 Service group 230 SNMP trap registration group 232 Revision number scalar 233 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 9
Chapter 11 Chapter 12 Chapter 13 Chapter 14 Chapter 15 Chapter 16 Switch connectivity unit port table 241 FCIP MIB Objects FCIP MIB overview 243 FCIP MIB system organization of MIB objects 243 FCIP entity instance table 245 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 10
Chapter 17 Chapter 18 Chapter 19 LLDP MIB 284 LLDP configuration group 284 LLDP statistics group 286 LLDP local system data group 287 LLDP remote systems data group 289 LLDP-EXT-DOT1-MIB 291 LLDP-EXT-DOT1-MIB organization 291 lldpXdot1 configuration group 293 lldpXdot1 local data group 294 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 11
Appendix A Appendix B Index MIB Object Groupings Switch variables 339 Sensor variables 339 Port variables 339 Variables for state and status 339 Variables for statistics and measurement 340 Event variables 340 ISL and - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 12
xii Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 13
document is organized xiii •Supported hardware and software xiv • following components: • Chapter 1, "Understanding Brocade SNMP," provides an introduction to Brocade SNMP and MIBs. • Chapter 2, Chapter 6, "SW-MIB Objects," provides information for FC Switch MIB (SW-MIB) object types. • Chapter 7, - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 14
all switches supporting these Fabric OS versions, including: • Brocade 300 • Brocade 4100 • Brocade 4900 • Brocade 5000 • Brocade 5100 • Brocade 5300 • Brocade 5410 • Brocade 5424 • Brocade 5450 • Brocade 5460 • Brocade 5470 • Brocade 5480 • Brocade 6505 • Brocade 6510 • Brocade 6520 • Brocade 7500 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 15
Blade The following platforms can interoperate with switches running Fabric OS v7.0.0, but cannot load Fabric OS v7.0.0: • Brocade 4100 • Brocade 4900 • Brocade 5000 • Brocade 7500/7500E • Brocade 7600 • Brocade 48000 The following blades are not supported in any chassis operating with Fabric OS - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 16
following changes have been made since this document was last released: • Information that was added: - Support for Brocade 6505, Brocade 6520, and Brocade VA-40FC - The following traps included: swDeviceStatusTrap - The following MIB objects included: swConnUnitPortTable swConnUnitPortEntry - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 17
readability, command names in the narrative portions of this guide are presented in mixed lettercase: for example, switchShow. In Notes, cautions, and warnings The following notices and statements are used in this manual. They are listed below in order of increasing severity of potential hazards. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 18
Notice to the reader Key terms For definitions specific to Brocade and Fibre Channel, see the technical glossaries on MyBrocade. See "Brocade resources" on page xviii for instructions on accessing MyBrocade. For definitions of SAN-specific terms, visit the Storage Networking Industry Association - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 19
problem, including the switch or fabric behavior immediately following the problem, and specific questions • Description of any troubleshooting as follows: • Brocade 300, 4100, 4900, 5100, 5300, 6510, 6520, 7500, 7500E, 7800, 8000, VA-40FC, and Brocade Encryption Switch-On the switch ID pull-out tab - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 20
switch is inoperable, you can get the WWN from the same place as the serial number, except for the Brocade DCX. For the Brocade DCX, access the numbers on the WWN cards by removing the Brocade from you. Forward your feedback to: [email protected] Provide the title and version number and as - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 21
it possible to use third-party tools to view, browse, and manipulate Brocade switch variables (MIBs) remotely as well as to set up an enterprise-level management process. Every Brocade switch and director supports SNMP. Recipients for SNMP traps are restricted according to security levels. Security - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 22
. Sent for all SNMPv3 users except noAuthNoPriv users. Not Sent. Sent only for authPriv users. Not Sent. Understanding SNMP basics Every Brocade switch carries an agent and management information base (MIB), as shown in Figure 1. The agent accesses information about a device and makes it available - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 23
. Understanding MIBs The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch. The MIB structure can be represented by a tree hierarchy. The root splits into three main branches: International Organization for Standardization - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 24
MIB: Brocade supports v4.4. and later releases. • Fabric Element (FE) MIB: accepted by the Internet Engineering Task Force (IETF). Brocade supports FE_RFC2837.mib station from the SNMP agent on the device is called a trap. Brocade switches send traps out on UDP port 162 and to any configured port. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 25
the FA traps if you want to use SNMP to monitor multiple connectivity units, including Brocade switches. The switchStatusPolicySet command determines the FA-TRAP switch status-related outputs: • connUnitStatusChange This trap is generated by Fabric watch such that only the swUnitsStatusChange - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 26
SW traps There are fourteen specific traps defined in Brocade SW-TRAP. 1. swfault (no longer supported) 2. swSensorScn (no longer supported) 3. swFCPortScn This trap is generated by a port state change. 4. swEventTrap This trap is generated by any switch event reported to the system error log. The - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 27
instance number in SNMP because SNMP numbering starts at 1; switch port numbering starts at 0. Loading Brocade MIBs The Brocade MIB is a set of variables that are private extensions to the Internet standard MIB-II. The Brocade agents support many other Internet-standard MIBs. These standard MIBs are - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 28
-DOT3-MIB • IP MIB • SNMP-COMMUNITY-MIB Before loading MIBs Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version (Table 3). TABLE 3 Firmware Fabric OS-supported SNMP versions SNMPv1 SNMPv2 SNMPv3 Fabric OS v5.x Yes Yes1 Yes2 Fabric - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 29
. 2. Fabric OS v5.x supports the SNMPv3-USM MIB (snmpUsmMIB), which is available as RFC 3414. MIB loading order Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the Brocade MIBs, refer to Figure - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 30
MIB P-BRIDEGE MIB Q-BRIDEGE MIB INET-Address - MIB BRCDFCIP.mib IEEE 802.1 PAE MIB RSTP-MIB Legend Standard MIB File Dependency Module name Brocade MIB Module name FOS supported FIGURE 5 Brocade SNMP MIB dependencies and advised installation order 10 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 31
supports the FCIP MIB and ifXtable. SNMP CLI usage The examples for configuring SNMPv3 users/traps are listed in the following section. Configuring SNMPv3 user/traps 1. Create a user on the switch ID: [0:0:0:0:0:0:0:0:0] 80:00:05:23:01:0A:23:34:21 User (rw): [snmpadmin2] Auth Protocol [MD5(1)/SHA(2)/ - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 32
1 Loading Brocade MIBs Engine ID: [0:0:0:0:0:0:0:0:0] address : [0.0.0.0] Committing configuration.....done. switch:root> snmpconfig --show snmpv3 SNMP Informs noAuth Priv Protocol: noPriv Engine ID: 80:00:05:23:01:0a:23:34:21 User 2 (rw): snmpadmin2 Auth Protocol: MD5 Priv Protocol: DES Engine ID: - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 33
Loading Brocade MIBs 1 Priv Protocol: noPriv Engine ID: 00:00:00:00:00:00:00: recipient configured yet An example of the SNMPv3 user trap recipients configured with DNS names and IPv6 addressess switch:admin> snmpconfig --set snmpv3 SNMP Informs Enabled (true, t, false, f): [false] SNMPv3 user - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 34
Committing configuration.....done. DCX_128:FID128:admin> switch:admin> snmpconfig --show snmpv3 SNMP Informs recipient Severity level: 2 Trap Entry 3: HCL0389U.corp.brocade.com Trap Port: 162 Trap User: snmpadmin3 Trap recipient supported in Fabric OS: 14 Fabric OS MIB Reference 53- - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 35
Loading Brocade MIBs 1 switch:root> snmpTraps --show # |Mib Name |Supported Traps 001|SW-MIB |sw-track-changes-trap | |sw- : 1 To send the sw-fc-port-scn trap to the recipient 10.35.52.33: switch:root> snmpTraps --send -trap_name sw-fc-port-scn -ip_address 10.35.52.33 Number of traps - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 36
1 Loading Brocade MIBs switch:admin> snmptraps -unblock -port 1/10 To block port traps on slot 1 and port 10: Switch:admin> snmptraps -block -port 1/10 Example of accessControl configuration: switch:admin> snmpconfig --set accessControl SNMP access list configuration: Access host subnet area in dot - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 37
Loading Brocade MIBs 1 Operation succeeded switch:admin> snmpconfig --show mibCapability [...] SW-MIB: YES swFault: NO Yes swExtTrap: Yes [...] To display the configuration for all MIBs and associated traps: switch:admin> snmpconfig --show mibcapability FE-MIB: YES SW-MIB: YES FA-MIB: YES - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 38
1 Loading Brocade MIBs swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: YES swIPv6ChangeTrap: system group configuration back to factory default ***** sysDescr = Fibre Channel Switch sysLocation = End User Premise sysContact = Field Support authTraps = 0 (OFF) ***** Are you sure? (yes, - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 39
. (Same values are set as in the switch SNMPv3 configuration.) NOTE SNMPv3 supports AES128 and DES protocols. SNMPv3 does not support privacy protocols AES192, AES256, and 3DES. Access Gateway and Brocade MIBs Table 4 shows the MIBs supported by Brocade Access Gateway. .TABLE 4 MIB name Access - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 40
the following commands (Table 5) to configure MIBs in the Fabric OS. For procedures for configuring SNMP on the Brocade switches, refer to the Fabric OS Administrator's Guide. TABLE 5 Commands for configuring SNMP Command Description snmpConfig snmpTraps This command has all the features of the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 41
for v1/v2c version will be dropped by the switch, and SNMPv1 traps will be blocked from being . In Fabric OS v6.3.0 and later, the --set snmpv3 command supports an interactive option to enable or disable informs by setting the parameter parameters include MIBs and traps supported by the SNMP agent. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 42
When used without a MIB name, this command displays a menu with supported MIBs and associated traps, and for each MIB or trap, you SNMP Traps are identified by their bit mask and can be read directly from the switch configuration. The MIB and trap status (enabled or disabled) status is recorded in a - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 43
administrator access within a fabric, and to provide service providers with a means to assign portions of a fabric to individual consumers. An AD may contain switches, devices, and ports. An AD may also limit access to a configured set of users. Support for Role-Based Access Control Role-Based - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 44
is only applicable for OEM customers. FOS v7.0.0 and v7.0.1 releases supported addition of system OID in trap OID to customized trap OID on .2.1.1.62.0.5 on DCX and 1.3.6.1.4.1.1588.2.1.1.71.0.5 on Brocade 5100. This feature is not supported from FOS 7.1.0 release. 24 Fabric OS MIB Reference 53- - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 45
MIB variables in this chapter come directly from the MIB-II itself. The notes that follow the descriptions refer to Brocade-specific information and are provided by Brocade. MIB-II object hierarchy Figure 6 through Figure 16 depict the organization and structure of MIB-II. Fabric OS MIB Reference - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 46
2 MIB II overview - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp - rmon - iFMIB FIGURE 6 MIB-II overall hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 47
ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 - ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.18 - ifOutDiscards 1.3.6.1.2.1.2.2.1.19 - ifOutErrors 1.3.6.1.2.1.2.2.1.20 - ifOutQLen 1.3.6.1.2.1.2.2.1.21 - ifSpecific 1.3.6.1.2.1.2.2.1.22 FIGURE 8 Interfaces hierarchy - at (1.3.6.1.2.1.3) - atTable 1.3.6.1.2.1.3.1 - atEntry - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 48
21.1 - ipRouteDest 1.3.6.1.2.1.4.21.1.1 - ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2 - ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 - ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 - ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 - ipRouteMetric4 1.3.6.1.2.1.4.21.1.6 - ipRouteNextHop 1.3.6.1.2.1.4.21.1.7 - ipRouteType 1.3.6.1.2.1.4.21 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 49
19 - icmpOutRedirects 1.3.6.1.2.1.5.20 - icmpOutEchos 1.3.6.1.2.1.5.21 - icmpOutEchoReps 1.3.6.1.2.1.5.22 - icmpOutTimestamps 1.3.6.1.2.1.5.23 1.3.6.1.2.1.5.19 - icmpOutRedirects 1.3.6.1.2.1.5.20 - icmpOutEchos 1.3.6.1.2.1.5.21 - icmpOutEchoReps 1.3.6.1.2.1.5.22 - icmpOutTimestamps 1.3.6.1.2.1.5.23 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 50
2 MIB II overview - tcp (1.3.6.1.2.1.6) - tcpRtoAlgorithm 1.3.6.1.2.1.6.1 - tcpRtoMin 1.3.6.1.2.1.6.2 - tcpRtoMax 1.3.6.1.2.1.6.3 - tcpMaxConn 1.3.6.1.2.1.6.4 - tcpActiveOpens 1.3.6.1.2.1.6.5 - tcpPassiveOpens 1.3.6.1.2.1.6.6 - tcpAttemptFails 1.3.6.1.2.1.6.7 - tcpEstabResets 1.3.6.1.2.1.6.8 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 51
.5 - 1.3.6.1.2.1.11.7 and 1.3.6.1.2.1.11.23 is not supported. - snmpInTooBigs 1.3.6.1.2.1.11.8 - snmpInNoSuchNames 1.3.6.1.2.1.11.9 - 1.3.6.1.2.1.11.19 - snmpOutTooBigs 1.3.6.1.2.1.11.20 - snmpOutNoSuchNames 1.3.6.1.2.1.11.21 - RMON group - snmpOutGenErrs 1.3.6.1.2.1.11.24 - snmpOutGetRequests - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 52
2 System group - ifMIB (1.3.6.1.2.1.31) - ifXTable 1.3.6.1.2.1.31.1.1 - ifXentry 1.3.6.1.2.1.31.1.1.1 - ifName 1.3.6.1.2.1.31.1.1.1.1 - ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 - ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 - ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 - ifOutBroadcastPkts 1.3.6.1.2.1.31 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 53
: • Fibre Channel Switches: iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcS witch.sw • Brocade Access Gateway: iso. length of the string must be of four characters. The default is Field Support. Set this value using the snmpconfig command. An administratively assigned name for - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 54
the snmpconfig command. A value that indicates the set of services that this entity primarily offers. The value is a sum. . FCIP tunnel support is added in Fabric OS 5.3.0 and later. To support FCIP tunneling, platforms (switches). The return value is dynamic for all Brocade switches and depends - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 55
• For VLAN the number starts from 1207959552 A textual string containing information about the interface. The ifDescr for non-bladed switches includes: lo, eth0, and fc0. The ifDescr for Brocade 12000, 24000, and 48000 directors includes: lo, eth0, fc0, and sit0, as well as fc1, eth0:1, and eth0 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 56
2 Interfaces group TABLE 9 Object and OID Access Description ifSpeed 1.3.6.1.2.1.2.2.1.5 Read only An estimate (in bits per second) of the interface's current bandwidth. For interfaces that do not vary in bandwidth or interfaces for which no accurate estimation can be made, this object should - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 57
19 ifOutErrors Read only 1.3.6.1.2.1.2.2.1.20 ifOutQLen Read only 1.3.6.1.2.1.2.2.1.21 ifSpecific Read only 1.3.6.1.2.1.2.2.1.22 The number of subnetwork-unicast packets delivered to a higher-layer protocol. NOTE: This object is not supported. The number of nonunicast packets (for example - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 58
2 AT group AT group Implementation of the Address Translation group is mandatory for all systems. Note, however, that this group is deprecated by MIB-II. From MIB-II onward, each network protocol group contains its own address translation tables. TABLE 10 Object and OID Access Description - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 59
for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams. The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (for example, for lack of buffer space). NOTE: This - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 60
on this interface. NOTE: This object is not supported. ipRouteTable 1.3.6.1.2.1.4.21 Not The IP routing table contains an entry for mechanisms defined by the network management protocol in use. ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2 Read-write The index value that uniquely identifies the local - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 61
by which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. ipRouteAge 1.3.6.1.2.1.4.21.1.10 Read-write The number of seconds since this route was last updated or otherwise determined to be correct. Older - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 62
TABLE 11 Object and OID Access Description ipRouteMask 1.3.6.1.2.1.4.21.1.11 Read-write The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 63
ICMP group 2 TABLE 11 Object and OID Access Description ipAddressTable 1.3.6.1.2.1.4.34 Not This table contains IPv4 and IPv6 addressing information relevant to the accessible entity's interfaces. ipAddressEntry 1.3.6.1.2.1.4.34.1 Not An address mapping for a particular interface. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 64
attempted to send. NOTE: This counter includes all those counted by icmpOutErrors. The number of ICMP messages that this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value must not include errors discovered outside the ICMP layer such as the inability of - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 65
1.3.6.1.2.1.5.20 Read only icmpOutEchos 1.3.6.1.2.1.5.21 Read only icmpOutEchoReps 1.3.6.1.2.1.5.22 Read RFC 793. The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 66
2 TCP group TABLE 13 Object and OID tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 tcpConnEntry - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 67
UDP group 2 TABLE 13 Object and OID tcpConnState 1.3.6.1.2.1.6.13.1.1 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 tcpInErrs 1.3.6.1.2.1.6.14 tcpOutRsts 1.3.6.1.2.1.6.15 Access Read-write - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 68
for any IP interface associated with the node, the value 0.0.0.0 is used. Read only The local port number for this UDP listener. EGP group Brocade does not support the EGP group. This section is not applicable. For complete information regarding the EGP group, refer to RFC 1213. Transmission group - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 69
only Description The total number of messages delivered to the SNMP entity from the transport service. The total number of SNMP messages that were passed from the SNMP protocol entity to the transport service. The total number of SNMP messages that were delivered to the SNMP protocol entity and - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 70
Access Read only snmpOutNoSuchNames Read only 1.3.6.1.2.1.11.21 snmpOutBadValues 1.3.6.1.2.1.11.22 Read only snmpOutGenErrs stored in nonvolatile memory so that it remains constant between re-initialization of the switch. This value can be changed with the snmpconfig command. The total number of - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 71
at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. NOTE: This object is not supported. The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 72
at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. NOTE: This object is not supported. The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 73
at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime NOTE: This object is not supported. The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 74
occupied by the current values for other interfaces. NOTE: This object is not supported. The value of sysUpTime on the most recent occasion at which any one implementation may be altered. This trap is generated for the following switch events: • reboot • fastboot A warmStart trap signifies that the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 75
is generated for the following ports: • FCIP GE ports [Brocade 7800E/Brocade 7500/FR4-18i router blade/FX8-24 DCX Extension Blade] • ISCSI xGE ports • FCIP GE ports - copper This trap is generated for the following switch events: • portdisable • fcoe -disable [for FCOE ports] Varbinds for this trap - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 76
2 Generic traps 56 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 77
the MIB variables in this chapter come directly from the MIB-II itself. The notes that follow the descriptions refer to Brocade-specific information and are provided by Brocade. RMON MIB object hierarchy Figure 17 through Figure 22 depict the organization and structure of RMON MIB. - iso - org - dod - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 78
16.1.1.1.18 - etherStatsPkts1024to1518Octets 1.3.6.1.2.1.16.1.1.1.19 - etherStatsOwner 1.3.6.1.2.1.16.1.1.1.20 - etherStatsStatus 1.3.6.1.2.1.16.1.1.1.21 FIGURE 18 Statistics hierarchy - history 1.3.6.1.2.1.16.2 - historyControlTable 1.3.6.1.2.1.16.2.1 - historyControlEntry 1.3.6.1.2.1.16 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 79
16.9.2.1 - logEventIndex 1.3.6.1.2.1.16.9.2.1.1 - logIndex 1.3.6.1.2.1.16.9.2.1.2 - logTime 1.3.6.1.2.1.16.9.2.1.3 - logDescription 1.3.6.1.2.1.16.9.2.1.4 FIGURE 21 Event hierarchy - rmonEventsV2 1.3.6.1.2.1.16.0 - risingAlarm 1.3.6.1.2.1.16.0.1 - fallingAlarm 1.3.6.1.2.1.16.0.2 FIGURE 22 RMON traps - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 80
that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices. The groups supported under this are statistics, history, alarm, and event. Statistics group TABLE 19 Object and OID statistics 1.3.6.1.2.1.16.1 etherStatsTable 1.3.6.1.2.1.16 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 81
Statistics group 3 TABLE 19 Object and OID Access etherStatsBroadcastPkts Read only 1.3.6.1.2.1.16.1.1.1.6 etherStatsMulticastPkts Read only 1.3.6.1.2.1.16.1.1.1.7 etherStatsCRCAlignErrors Read only 1.3.6.1.2.1.16.1.1.1.8 etherStatsUndersizePkts Read only 1.3.6.1.2.1.16.1.1.1.9 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 82
16.1.1.1.18 etherStatsPkts1024to15 Read only 18Octets 1.3.6.1.2.1.16.1.1.1.19 etherStatsOwner Read-write 1.3.6.1.2.1.16.1.1.1.20 etherStatsStatus Read-write 1.3.6.1.2.1.16.1.1.1.21 Description The total number of packets (including bad packets) received that were between 512 and 1023 octets - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 83
therefore using the resources assigned to it. The status of this historyControl entry. Ethernet history group TABLE 21 Object and OID etherHistoryTable 1.3.6.1.2.1.16.2.2 etherHistoryEntry 1.3.6.1.2.1.16.2.2.1 etherHistoryIndex 1.3.6.1.2.1.16.2.2.1.1 Access Not accessible Not accessible Read only - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 84
3 Alarm group TABLE 21 Object and OID Access etherHistoryUndersizePkt Read only s 1.3.6.1.2.1.16.2.2.1.10 etherHistoryOversizePkts Read only 1.3.6.1.2.1.16.2.2.1.11 etherHistoryFragments Read only 1.3.6.1.2.1.16.2.2.1.12 etherHistoryJabbers Read only 1.3.6.1.2.1.16.2.2.1.13 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 85
Event group 3 TABLE 22 Object and OID alarmSampleType 1.3.6.1.2.1.16.3.1.1.4 alarmValue 1.3.6.1.2.1.16.3.1.1.5 alarmStartupAlarm 1.3.6.1.2.1.16.3.1.1.6 alarmRisingThreshold 1.3.6.1.2.1.16.3.1.1.7 alarmFallingThreshold 1.3.6.1.2.1.16.3.1.1.8 alarmRisingEventIndex 1.3.6.1.2.1.16.3.1.1.9 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 86
3 Event group TABLE 23 Object and OID eventEntry 1.3.6.1.2.1.16.9.1.1 eventIndex 1.3.6.1.2.1.16.9.1.1.1 eventDescription 1.3.6.1.2.1.16.9.1.1.2 eventType 1.3.6.1.2.1.16.9.1.1.3 eventCommunity 1.3.6.1.2.1.16.9.1.1.4 eventLastTimeSent 1.3.6.1.2.1.16.9.1.1.5 eventOwner 1.3.6.1.2.1.16.9.1.1.6 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 87
RMON Traps 3 RMON Traps TABLE 24 Trap name and OID rmonEventsV2 1.3.6.1.2.1.16.0 risingAlarm 1.3.6.1.2.1.16.0.1 fallingAlarm 1.3.6.1.2.1.16.0.2 Variables Description Definition point for RMON notifications. "alarmIndex" "alarmVariable" "alarmSampleType" "alarmValue" "alarmRisingThreshold" The - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 88
3 RMON Traps 68 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 89
ELEMENT-MIB (experimental branch 87 •fcFeConfig group 93 •fcFeOp group 96 •fcFeError group 99 •fcFeAcct group 100 •fcFeCap group 101 FE MIB overview Brocade supports two versions of the FE MIB: • FIBRE-CHANNEL-FE-MIB (RFC2837) in the MIB-II branch. • FCFABRIC-ELEMENT-MIB in the experimental - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 90
from the FIBRE-CHANNEL-FE-MIB itself. The notes that follows the descriptions typically pertain to Brocade-specific information and are provided by Brocade. NOTE Brocade does not support the settable "Write" function for any of the Fibre Channel FE MIB objects except fcFxPortPhysAdminStatus. The - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 91
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 FIBRE-CHANNEL-FE-MIB organization Figure 23 through Figure 28 depict the organization and structure of FIBRE-CHANNEL-FE-MIB. - iso - org - dod - internet - mgmt - mib-2 - fcFeMIB - fcFeMIBObjects - fcFeConfig - fcFeStatus - fcFeError - fcFeAccounting - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 92
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 - fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 - fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 - fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 93
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 94
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 95
-to-buffer credit of an Nx_Port or Fx_Port. Version of FC-PH supported by an Nx_Port or Fx_Port. Indicates the Class 1 Stacked Connect Mode supported by an Nx_Port or Fx_Port. 1 (none) 2 (transparent) 3 (lockedDown) Class of service capability of an Nx_Port or Fx_Port. bit 0 (Class F) bit 1 (Class - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 96
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 26 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Fc0BaudRate Integer according to FC-0 baud rates Fc0BaudRateCap Integer from 0 to 127 Fc0MediaCap Integer from 0 to 65535 Fc0Medium Integer Fc0TxType Fc0Distance - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 97
is 32. For the Brocade Encryption switch, this value is 32. For the Brocade DCX, this value is 640. For the Brocade DCX-4S, this value is 320. For the Brocade 48000, this value is 384. For the Brocade 6505, this value is 24. For the Brocade 6510, this value is 48. For the Brocade 6520, this value is - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 98
Read only The maximum number of modules in the fabric element, regardless of their current state. The valid value for all Brocade switches is 1. Not accessible A table that contains information about the modules, one entry for each module in the fabric element. Not accessible An entry containing - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 99
Brocade 4100 • Brocade 4900 • Brocade 5000 • Brocade 5100 • Brocade 5300 • Brocade 7500 or 7500E • Brocade 7600 • Brocade 7800 Extension Switch • Brocade 8000 • Brocade Encryption Switch • Brocade DCX • Brocade DCX-4S • Brocade 48000 • Brocade 6505 • Brocade 6510 • Brocade 6520 • Brocade to support. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 100
as the time-out value for detecting an error condition. A value indicating the set of Classes of Service supported by the Fx_Port. A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. Valid values: • 1 - true • 2- false A value indicating the mode of Stacked Connect - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 101
port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. NOTE: This object is not supported on the FC10-6 port blade. The current operational mode of the Fx_Port. Valid values: • unknown (1) • fPort (2) • flPort (3) The desired operational mode of the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 102
. The value is a number of bytes in the range 128 to 2112, inclusive. Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the Fx_Port has granted the request. A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 103
11 fcFxPortBbCreditModel Read only 1.3.6.1.2.1.75.1.2.3.1.12 Description A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Valid values: • yes (1) - The Fx_Port has agreed to - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 104
Sequence errors received by this Fx_Port. The number of Offline Sequence issued by this Fx_Port. fcFeAccounting group The Accounting group is supported only in Fabric OS v4.x. The Accounting group consists of the following tables: • Class 1 accounting table • Class 2 accounting table • Class - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 105
fcFeAccounting group 4 TABLE 30 Object and OID Access Description fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 Read only The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached Nx_Port. fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 Read - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 106
in a frame that the 1.3.6.1.2.1.75.1.5.1.1.6 Fx_Port is capable of receiving from its attached Nx_Port. fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 Read only A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. 86 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 107
supporting Class 1 service. A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. A flag indicating whether the Fx_Port is capable of supporting •fcFeAcct group 100 •fcFeCap group 101 NOTE Brocade does not support the settable "Write" function for any of - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 108
4 FCFABRIC-ELEMENT-MIB (experimental branch) • Capability FCFABRIC-ELEMENT-MIB organization Figures 29 through 34 depict the organization and structure of FCFABRIC-ELEMENT-MIB. - iso - org - dod - internet - experimental - fibreChannel - fcFabric - fcFe - fcFeConfig - fcFabricName - fcElementName - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 109
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 110
4 FCFABRIC-ELEMENT-MIB (experimental branch) - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 111
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeAcct (-- Not Supported --) FIGURE 33 fcFeAcct hierarchy - fcFeCap - fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 - fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 - fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 - fcFxPortCapFxPortIndex 1.3.6.1.3.42 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 112
unique within the address space of a fabric. Receive Data_Field size. Buffer-to-buffer credit. Represents the version of FC-PH supported by an Nx_Port or Fx_Port. 1 (none) 2 (transparent) 3 (lockedDown) bit 0 (Class F) bit 1 (Class 1) bit 2 (Class 2) bit 3 (Class 3) bit 4 (Class 4) bit 5 (Class - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 113
(unknown) 2 (fPort) 3 (flPort) 1 (regular) 2 (alternate) fcFeConfig group This group consists of scalar objects and tables. It contains the configuration and service parameters of the fabric element and the Fx_Ports. The group represents a set of parameters associated with the fabric element or an - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 114
of modules in the fabric element, regardless of their current state. The Brocade 12000, 24000, and 48000 directors do not support this MIB variable. The Value for fcFeModuleCapacity is always one for all the supported switches. A table that contains, one entry for each module in the fabric element - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 115
Value is used as the time-out value for detecting an error condition. A value indicating the set of Classes of Service supported by the Fx_Port. Valid values: • Class F (0) • Class 1 (1) • Class 2 (2) • Class 3 (3) • Class 4 (4) • Class 5 (5) • Class 6 (6) A flag indicating whether the Fx_Port - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 116
if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. The FC-0 baud rate of the Fx_Port. The Brocade 12000, 24000, 48000, and DCX directors do not support this MIB variable. The FC-0 medium of the Fx_Port. The FC-0 transmitter type of the Fx_Port - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 117
fcFeOp group 4 TABLE 34 Object and OID Access Description fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 Read only The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Ports during fabric login. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 118
a number of bytes in the range 128 to 2112, inclusive. fcFxPortCosSuppAgreed Read only Indicates that the attached Nx_Port has requested the Fx_Port for the 1.3.6.1.3.42.2.1.2.4.1.7 support of classes of services and the Fx_Port has granted the request. 98 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 119
has been agreed. Valid values: • yes (1) • no (2) A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Valid values: • yes (1) • no (2) The port name of the attached Nx_Port, if - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 120
the attached Nx_Port. The number of Offline Sequence errors received by this Fx_Port. The number of Offline Sequence errors issued by this Fx_Port. fcFeAcct group Brocade supports fcFxPortC2AccountingTable and fcFxPortC3AccountingTable. 100 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 121
is capable of receiving from its attached Nx_Port. A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 122
. This variable has been deprecated and might be implemented for backward compatibility. A value indicating the set of media that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility. 102 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 123
MIB is supported only in Fabric OS v5.x, v6.0, v6.1, v6.1.2_CEE, v6.2.0, v6.3.0, v6.4.0, v6.4.1_fcoe, v7.0.0, and v7.1.0. The descriptions of each of the MIB variables in this chapter come directly from Entity MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 124
5 Entity MIB overview - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups FIGURE 35 Overall tree structure for Entity - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 125
Entity MIB overview 5 - entityMapping - entLPMappingTable 1.3.6.1.2.1.47.1.3.1 - entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 - entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 - entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 - entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 - entAliasLogicalIndexOrZero - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 126
Possible values for PhysicalClass Description other (1) unknown (2) chassis (3) The physical entity class is known but does not match any of the supported values. The physical entity class is unknown to the agent. The physical entity class is an overall container for networking equipment. Any - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 127
forwarding networking traffic, such as a shared backplane in a modular Ethernet switch. Note that an agent might model a backplane as a single physical with the logical entity (that is, SNMPv3 not supported). • For the Brocade 3016 or Brocade 4020 blades, the snmpEngineID takes the UUID value. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 128
always contains at least one row for an "overall" physical entity. This object is implemented for Fabric OS v6.4.0. The "overall" physical entry for Brocade is the chassis, and in Fabric OS v6.4.0 and later, it is marked as a FRU. Information about a particular physical entity. Each entry provides - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 129
slot (one blade, two power supplies, two fans) • Module: One entry for blades, two entries for power supplies, and two entries for fans Brocade 5300 switches can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one blade, two - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 130
supplies, three fans) • Module: Eight entries for port blades, two entries for CPs, four entries for power supplies, and three entries for fans Brocade 3900 switches can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 131
(one row) • Container: One entry for each FRU slot (one switch blade, two power supplies, two fans) • Module: One entry for switch blade, up to two entries for power supplies, and up to two entries for fans Brocade 6520 switch can have the following hierarchy of physical objects: • Chassis: One - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 132
5 Physical entity group TABLE 39 Object and OID Access entPhysicalParentRelPos Read only 1.3.6.1.2.1.47.1.1.1.1.6 entPhysicalParentRelPos Read only 1.3.6.1.2.1.47.1.1.1.1.6 (continued) entPhysicalName Read only 1.3.6.1.2.1.47.1.1.1.1.7 Description An indication of the relative position of - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 133
Physical entity group 5 TABLE 39 Object and OID Access entPhysicalHardwareRev Read only 1.3.6.1.2.1.47.1.1.1.1.8 entPhysicalFirmwareRev Read only 1.3.6.1.2.1.47.1.1.1.1.9 entPhysicalSoftwareRev Read only 1.3.6.1.2.1.47.1.1.1.1.10 Description The vendor-specific hardware revision string for the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 134
value. Set to serial number and part number (if available), respectively. NOTE: For the Brocade 4024 blade, entPhysicalSerialNum displays the vendor-specific serial number; for other switches it displays the factory serial number. The name of the manufacturer of this physical component. The - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 135
sensors, power supplies, and fans; False (2) for container and chassis type entries. TABLE 40 Platform entPhysicalTable entries for Brocade switches Blades Fans Brocade 200E 1 3 fans not a FRU Brocade 3016 1 NA Power supply 1 PS not a FRU NA WWN card 1 WWN unit not a FRU 1 WWN unit not - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 136
Switch Brocade 300 8 blades 4 blades NA 1 blade 3 fans 2 fans 3 fans 3 fans 4 PS 2 PS 2 PS 1 PS Brocade 5100 1 blade 2 fans 2 PS Brocade 5300 1 blade 3 fans 2 PS Brocade 8000 1 blade 3 FRUs 2 PS Brocade 6505 1 2 fans 2 PS Brocade 6510 1 blade 2 fans 2 PS Brocade 6520 Brocade - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 137
entPhysicalTable entries for Brocade switches (Continued) Blades Fans Power supply Brocade 7800 Extension 1 Switch Brocade VA-40FC 1 supported. Entity mapping group This group is not supported. General group This group is not supported. Entity MIB trap Entity MIB trap is not supported - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 138
. Note that the entAliasMappingTable may be useful for all agents, however implementation of the entityLogicalGroup or entityLogical2Group is required to support this table. • Type: Object Object: entPhysicalSerialNum Min access: not-accessible Description: Read and write access is not required for - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 139
Entity MIB conformance information 5 TABLE 41 object and OID entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 Access Not accessible entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 Not accessible entityMappingGroup 1.3.6.1.2.1.47.3.2.3 Not accessible entityGeneralGroup 1.3.6.1.2.1.47.3.2.4 Not accessible - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 140
5 Entity MIB conformance information TABLE 41 object and OID entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 Access Not accessible Not accessible Description The collection of objects used to represent physical system components, for which a single agent - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 141
Entity MIB conformance information 5 Fabric OS MIB Reference 121 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 142
5 Entity MIB conformance information 122 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 143
SW-MIB overview The descriptions of the MIB variables in this chapter come directly from the FC Switch MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. NOTE The port swap feature does not have any effect on SNMP for SW MIB. SW-MIB - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 144
6 SW-MIB overview - iso - org - dod - internet - private - enterprises - bcsi - commDev - fibreChannel - fcSwitch - sw - swTrapsV2 - swSystem - swFabric - swModule - swAgtCfg - swFCport - swNs - swEvent - swFwSystem - swEndDevice - swGroup - swBlmPerfMnt - swTrunk - swTopTalker - swCpuorMemoryUsage - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 145
1588.2.1.1.1.1.18 - swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 - swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 - swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 - swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 - swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 - swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 146
6 SW-MIB overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 147
18 - swFCPortTooManyRdys 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 - swFCPortNoTxCredits 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 - swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 - swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 - swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 - swFCPortRxTooLongs - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 148
6 SW-MIB overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 149
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19 - swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 - swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 - swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 - swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 - swFwCustInBetweenActs 1.3.6.1.4.1.1588 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 150
1588.2.1.1.1.21.1.1.3 - swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 - swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 - swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 - swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 - swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 151
SW-MIB overview 6 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 152
swConnUnitTimedOut 1.3.6.1.4.1.1588.2.1.1.1.27.1.21 - swConnUnitProcRequired 1.3.6.1.4.1.1588.2.1.1.1. Name (WWN) of Brocade-specific products and ports. Integer of size 1 to 239 Fibre Channel domain ID of the switch. Integer of size 1 to 2048 Index of the neighbor inter-switch link (ISL) entry. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 153
swFwMailAlertErrlogSnmptrap 20 swFwMailAlertPortloglock 21 swFwMailAlertErrlogPortloglock 22 swFwMailAlertSnmptrapPortloglock swFwMailAlertElStPlPf 63 swFwMailAlertElStPlRnPf Threshold or Action levels: 1 swFwReserved (Not supported) 2 swFwDefault 3 swFwCustom Commands: • portthconfig To set port - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 154
class: 17 swFwFabricEd 18 swFwFabricFr 19 swFwFabricDi 20 swFwFabricSc 21 swFwFabricZc 23 swFwFabricFl 24 swFwFabricGs F/FL Port (Optical) 32 swFwEPortTXPerf 33 swFwEPortState 84 swFwEPortUtil (not supported) 87 swFwEPortLr 91 swFwEPortC3Discard 97 swFwEPortTrunkUtil 94 swFwVEPortStateChange - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 155
and EportPktl are the MIB defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500), while VEPortUtil and VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade. In the index swFwEnvTemp, Env refers to Environment class and Temp refers - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 156
6 sw traps TABLE 43 SW-MIB traps Trap name Commands to configure "swFault" on page 137 N.A. (not supported) "swSensorScn" on page 137 N.A. "swFCPortScn" on page 137 "swEventTrap" on page 138 Always on For more information, refer to the snmpConfig command in the Fabric - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 157
sw traps 6 Description This trap is no longer generated. A swFault is generated whenever the diagnostics detect a fault with the switch. #TYPE Switch is faulty. #SUMMARY Faulty reason: %d and SSN is #%s #ARGUMENTS 0, 1 #SEVERITY Critical #TIMEINDEX 1 #STATE Nonoperational This object is - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 158
level is %d and SSN is #%s #ARGUMENTS 2, 0, 1, 6, 4, 5, 7, 3, 8, 9 #SEVERITY Warning #TIMEINDEX 1 #STATE Operational For information on setting thresholds in Fabric Watch, refer to the Fabric Watch Administrator's Guide. 138 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 159
Informational #TIMEINDEX 1 #STATE Operational Some of the triggers that will generate this trap are: • Log out • Unsuccessful log in • Successful log in • Switch configuration changes • Track changes on and off This trap gets sent when track-changes is set to ENABLED and is configured to send - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 160
enabled. This is an internal trap. This trap is sent when the switch changes it state to online or offline. This trap is disabled by default. This trap is sent when the ports are moved from one switch to another. This trap is disabled by default. This trap is sent for one - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 161
swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 Read only For example: Thu Aug 17 15:16:09 2000 The date and time when the firmware was last loaded to the switch. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 162
6 Switch system group TABLE 45 Object and OID swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 Access Description Read only The date and time when the firmware was last downloaded or the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 163
but omit the POST. When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot For the Brocade 3250, 3850, 3900, 8000, This OID is supported in Fabric OS v2.x through v3.x. This OID is not supported in Fabric OS v4.0 through v4.2. This OID is supported in Fabric OS v4 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 164
v4.4 and later. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and later versions. swBeaconOperStatus Read only 1.3.6.1.4.1.1588.2.1.1.1.1.18 The current operational status of the switch beacon. Possible values are: • on (1) - The LEDs on the front panel of the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 165
has experienced an unknown fault. • sw-embedded-port-fault (3) - The switch has experienced an embedded port fault. swNumSensors Read only 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 166
SLOT #0: TEMP #3 FAN #1 Power Supply #1 Return values for the Brocade 12000, 24000, and 48000 directors depend upon the configuration of your system -enabled fabric, the number of switches will be 0 to 128. 1.3.6.1.4.1.1588.2.1.1.1.1.24 swEtherIPAddress Read only Supported in Fabric OS v6.2.0 and - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 167
the various Brocade switches Temp Fans Brocade 200E Brocade 300 Brocade 3014 Brocade 3016 Brocade 3250 Brocade 3850 Brocade 3900 Brocade 4012 Brocade 4016 Brocade 4018 Brocade 4020 Brocade 4024 Brocade 4100 Brocade 4424 Brocade 4900 Brocade 5000 Brocade 5100 Brocade 5300 Brocade 5410 2 sensors - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 168
DCX-4S 16+ sensors 3 fans 4 PS Brocade 8000 4 sensors 3 FRUs 2 PS Brocade 6505 4 sensors 2 fans 2 PS Brocade 6510 4 sensors 2 fans 2 PS Brocade 6520 4 sensors 2 fans 2 PS Brocade DCX 8510-8 58+ sensors 3 fans 4 PS Backbone Brocade DCX 8510-4 35+ sensors 2 fans 2 PS Backbone - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 169
only 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.2 This is the port that has an ISL to another switch. This value is the same as the physical port number of the local switch +1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. swNbRemDomain - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 170
of the ISL. The physical port number of the remote switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the This table contains information on the member switches of a fabric. 1.3.6.1.4.1.1588.2.1.1.1 accessible Supported in Fabric OS v2.6.1 and not v3 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 171
Secure Fabric OS, the community strings can only be modified on the primary switch. NOTE: This table is deprecated in Fabric OS v7.0. Use the tables The return value for this entry is 1 through 6. This is a community string supported by the agent. If a new value is set successfully, it takes effect - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 172
statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which supports the Fibre Channel protocol, such as F_Port, service parameters of the 1.3.6.1.4.1.1588.2.1.1.1.6.2 accessible switch port. .1 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.1 Read only The switch - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 173
swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.2 Read only The type of ASIC for the switch port. Possible values are: • stitch (1) • flannel (2) • loom (3) (Brocade 2000 series) • bloom (4) (Valid value for Brocade 3250, 3850, 3900, 12000, 24000) • rdbloom (5) • wormhole (6) • other (7) (Valid value - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 174
Read only Indicates the media transmitter type of the port. Possible values are: • unknown (1) - Cannot determine the port driver. • lw (2) - Long wave laser. • sw (3) - Short wave laser. • ld (4) - Long wave LED. • cu (5) - Copper (electrical). swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.11 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 175
Fibre Channel port group 6 TABLE 50 Object and OID Access Description swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.21 Read only Counts the number of encoding error or disparity error inside frames received. swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.22 Read only Counts the number - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 176
is only applicable to the Brocade DCX director. NOTE: This object is deprecated. swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.36 Read only Supported in Fabric OS v4.1.x and names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 177
-2. The format of the address is in IPv6. The class of services supported by the port. This value is a hard-coded bitmap and indicates the supported services as follows: • Class F (1) • Class 1 (2) • Class F-1 (3) • Class 2 (4) • Class F-2 (5) • Class 1-2 (6) • Class F-1-2 (7) • Class 3 (8) • Class - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 178
from 0 to 1024. The table of event entries. The events will be received from the CHASSIS and the created logical switches. Only external RASlog messages are supported. These external messages are documented in the Fabric OS Message Reference. An entry of the event table. Every RASLOG message is - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 179
Watch group The Fabric Watch group contains one license scalar and two tables. • The scalar, "swFwFabricWatchLicense", is used to tell if the switch has proper license for Fabric Watch. • One table, "swFwClassAreaTable", contains classArea information such as threshold unit string, time base, low - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 180
only This index represents the Fabric Watch classArea combination. 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 For the class areas configured in the switch, use the thconfig --show command. swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 Read-write This applies or cancels the configuration - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 181
Fabric Watch group 6 TABLE 53 Object and OID Access Description swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 Read-write A customizable polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature ( - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 182
6 Fabric Watch group TABLE 53 Object and OID Access Description swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 6 Read only Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or below the low threshold. swFwDefaultBelowActs - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 183
Fabric Watch group 6 TABLE 53 Object and OID Access Description swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 6 Read-write Pointer to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 184
6 Fabric Watch group TABLE 53 Object and OID Access Description swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Read only Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1). For example, the indexes for - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 185
(Threshold names) envFan001 envPS002 envTemp001 sfpTemp001 sfpRXP001 sfpTXP001 sfpCrnt001 sfpVolt001 sfpGS000 eportCRCs007 eportLink007 Env Fan 1 (Not supported) Env Power Supply 2 (Not supported) Env Temperature 1 GBIC Temperature 1 GBIC RX power 1 GBIC TX power 1 GBIC Current 1 SFP Voltage 1 SFP - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 186
7 E Port State Changes 7 E Port Loss of Sync 7 E Port TX Performance 7 E Port Invalid Words 7 E Port Link Reset 7 E Port Util 7 (Not supported) E Port Trunk Util 7 E Port C3 Discard 7 E Port Packet Loss 7 (Not supported) Fabric Domain ID Fabric E-port down Fabric Fabric login Fabric FabricQL (Not - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 187
Security RSNMP Violations 0 (Not supported) Security WSNMP Violations 0 (Not supported) Security SES Violations 0 (Not supported) Security MS Violations 0 (Not supported) Security Serial Violations 0 (Not supported) Security Front Panel Violations 0 (Not supported) Security SCC Violations 0 Security - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 188
Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade. NOTE The FCU port is supported on the following platforms only: Brocade 3016 Brocade 3014 Brocade 4012 Brocade 4020 Brocade 4016 Brocade 4024 Brocade 4018 Brocade 4424 Brocade 5440 Brocade 5450 Brocade 5460 Brocade 5410 Brocade 5480 Brocade - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 189
only Invalid CRC count for the end device. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 Switch group Switch group is not supported. TABLE 56 Object and OID Access Description swGroup 1.3.6.1.4.1.1588.2.1.1.1.22 Not The OID sub-tree for switch group. accessible swGroupTable Not The table of groups - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 190
of the member switch. This object identifies the position of the member switch in the group, based on the order that the switches were added in the to a specific port. For the Brocade 4100, this value will always be 0. CRC counters are not supported on this platform. swBlmPerfEEMntTable Not End - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 191
1588.2.1.1.1.23.3. accessible 1 swBlmPerfFltPort Read only 1.3.6.1.4.1.1588.2.1.1.1.23.3. 1.1 This object identifies the port number of the switch. swBlmPerfFltRefkey Read only 1.3.6.1.4.1.1588.2.1.1.1.23.3. 1.2 This object identifies the reference number of the filter. This reference - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 192
• yes (8) swTrunkTable Not This object displays trunking information for the switch. 1.3.6.1.4.1.1588.2.1.1.1.24.2 accessible For the Brocade 4100, cc ports per trunk are supported. swTrunkEntry Not Entry for the trunking table. 1.3.6.1.4.1.1588.2.1.1.1.24.2. accessible 1 swTrunkPortIndex - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 193
entry. The possible values are one to maximum number of entries. swTopTalkerMntPort Read only 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.2 This object identifies the switch port number on which the F_Port mode toptalker is added. This attribute is applicable to F_Port mode only. swTopTalkerMntSpid Read - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 194
6 CPU or memory usage group TABLE 59 Object and OID Access Description swTopTalkerMntDpid Read only 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.4 swTopTalkerMntflow Read only 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.5 swTopTalkerMntSwwn Read only 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.6 swTopTalkerMntDwwn - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 195
the memory usage exceed the specified threshold limit. This OID specifies the low threshold value. This OID specifies the high threshold value. Switch connectivity unit port statistics extension table This table is an extension of connectivity unit port statistics table. This table can be queried - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 196
6 Switch connectivity unit port statistics extension table TABLE 61 Object and OID Access Description swConnUnitStopTenancySt arVation 1.3.6.1.4.1.1588.2.1.1.1. 27.1.5 Read only swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1. 27.1.6 Read only swConnUnitTransferConne - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 197
Switch connectivity unit port statistics extension table 6 TABLE 61 Object and OID Access Description swConnUnitUnknownInterr upts 1.3.6.1.4.1.1588.2.1.1.1. 27.1.20 Read only swConnUnitTimedOut 1.3.6.1.4.1.1588.2.1.1.1. 27.1.21 Read only swConnUnitProcRequired 1.3.6.1.4.1.1588.2.1.1.1. 27 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 198
6 Switch connectivity unit port statistics extension table 178 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 199
HA-MIB overview The HA-MIB provides information about the High Availability features of Fabric OS v6.3.0. This MIB is supported only in Fabric OS v4.1.0 and later (and is not supported in Fabric OS v3.x or Fabric OS v2.6.x). The descriptions of each of the MIB variables in this chapter come - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 200
7 HA-MIB overview - haMIB (1.3.6.1.4.1.1588.2.1.2) - highAvailability (1.3.6.1.4.1.1588.2.1.2.1) - haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 - fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 201
to take over. • nonredundant (1) Single or Dual CP system where the standby CP is not available to take over operation of the switch. FRU table TABLE 64 Object and OID Access Description fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 Not accessible This table inventories the field-replaceable unit (FRU - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 202
zero for other FRUs. .TABLE 65 Platform Valid FRU counts for the various Brocade switches Blades Fans Brocade 3850 Brocade 3900 Brocade 4012 Brocade 4100 Brocade 4900 Brocade 5000 Brocade 7500 Brocade 7600 Brocade 12000 Brocade 24000 Brocade 48000 NA NA NA NA NA NA NA NA 8 port blades 2 CP - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 203
for the various Brocade switches (Continued) Blades Fans Power supply Brocade DCX Brocade DCX-4S Brocade 300 Brocade 5100 Brocade 5300 Brocade 8000 Brocade 7800 Extension Switch Brocade 6505 Brocade 6510 Brocade 6520 Brocade DCX 8510-8 Backbone Brocade DCX 8510-4 Backbone Brocade VA-40FC 8 port - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 204
at which this event happened. 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 fruHistoryFactoryPartNum Read only The Brocade part number of the FRU object. 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 fruHistoryFactorySerialNum Read only The Brocade serial number of the FRU object. 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 CP table - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 205
be generated under the following events: • When FRU is added, removed, or failed • When FRU is powered on or off • When the switch is rebooted • When there is a fault in the blade cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 cpStatus cpLastEvent swID swSsn This trap is sent when the status of - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 206
7 HA-MIB traps 186 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 207
FICON MIB overview The FICON MIB module (LINK-INCIDENT-MIB) defines support for FICON in Fabric OS v4.1.2 and later. This MIB addresses link incident and link failure data for FICON hosts and devices connected to a Brocade switch. The descriptions of each of the MIB variables in this chapter come - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 208
8 FICON MIB overview - iso - org - dod - internet - private - enterprises - bcsi - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps FIGURE 62 Overall tree structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 209
1.3.6.1.4.1.1588.2.1.1.50.21.0.1 - linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 - linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 - linkLIRRListenerRemoved 1.3.6.1.4.1.1588.2.1.1.50.21.0.4 - linkRLIRFailureIncident 1.3.6.1.4.1.1588.2.1.1.50.21.0.5 FIGURE 64 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 210
8 FICON MIB overview TABLE 69 Name FICON MIB textual conventions (Continued) Status Description Syntax RLIRLinkFailureType RNIDManufacturer RNIDTagType LinkWwn RegType RNIDSequenceNumber RNIDManufacturerPlant RNIDParams PortType RNIDFlags LinkFormat RNIDType Current Current Current Current - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 211
. nodeRNIDTable Not A table that contains one entry for each FICON RNID node attached to 1.3.6.1.4.1.1588.2.1.1.50.2. accessible a switch. 2 nodeRNIDEntry Not A entry containing the RNID information for a FICON node. 1.3.6.1.4.1.1588.2.1.1.50.2. accessible 2.1 nodeRNIDIndex Read only - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 212
of the connected port. switchRNIDTableNumEntries Read only 1.3.6.1.4.1.1588.2.1.1.50.2. 3 The number of entries in an RNID table that corresponds to the switch. For additional information on FICON MIB tables, refer to the ficonShow command in the Fabric OS Command Reference. switchRNIDTable Not - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 213
10 Identifies the parameters of the switch. nodeVfId Read only The Virtual Fabric ID of the switch. For VF-unaware switches, this 1.3.6.1.4.1.1588.2.1.1.50.2. value will port. Registration type: conditional or unconditional. Protocol type supported. Fabric OS MIB Reference 193 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 214
.2.1.1.50.4.2.1.9 rLIRFabricWwn Read only 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10 rLIRLinkFailureType Read only 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.11 The number of entries in a switch RLIR table. For additional information on FICON MIB tables, refer to the ficonShow command in the Fabric OS Command - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 215
nodeRNIDIndex nodeRNIDIncidentPortWWN nodeRNIDConnectedPortWWN nodeVfId A device deregistered with the switch. linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 lIRRListenerPortWWN lIRRListenerPID lIRRIndex nodeVfId A listener for link failure incident is added. linkLIRRListenerRemoved - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 216
8 LinkIncident MIB traps group 196 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 217
-specific information and are provided by Brocade. The object types in FCMGMT-MIB are organized into the following groups: • Connectivity • Trap Registration • Revision Number • Statistic Set • Service Set NOTE The port swap feature will not have any effect on SNMP for FA MIB. FCMGMT-MIB system - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 218
9 FibreAlliance MIB overview - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94.1.6 + connUnitRevsTable 1.3.6.1.3.94.1.7 + connUnitSensorTable 1.3.6.1.3.94.1.8 + connUnitPortTable 1.3.6.1.3.94.1.10 + - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 219
- connUnitNumZones 1.3.6.1.3.94.1.6.1.18 - connUnitModuleId 1.3.6.1.3.94.1.6.1.19 - connUnitName 1.3.6.1.3.94.1.6.1.20 - connUnitInfo 1.3.6.1.3.94.1.6.1.21 - connUnitControl 1.3.6.1.3.94.1.6.1.22 - connUnitContact 1.3.6.1.3.94.1.6.1.23 - connUnitLocation 1.3.6.1.3.94.1.6.1.24 - connUnitEventFilter - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 220
.1.18 - connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 - connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 - connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 - connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 - connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 FIGURE 69 ConnUnitPortTable hierarchy - connUnitEventTable - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 221
FibreAlliance MIB overview 9 - connUnitLinkTable 1.3.6.1.3.94.1.12 - connUnitLinkEntry 1.3.6.1.3.94.1.12.1 - connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 - connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 - connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 - connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 222
94.4.5.1.19 - connUnitPortStatCountClass2RxFrames 1.3.6.1.3.94.4.5.1.20 - connUnitPortStatCountClass2TxFrames 1.3.6.1.3.94.4.5.1.21 - connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 - connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 - connUnitPortStatCountClass2FRJTFrames - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 223
FibreAlliance MIB overview 9 - connUnitServiceSet - connUnitServiceScalars - connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 FIGURE 74 ConnUnitServiceScalars hierarchy - connUnitServiceSet - connUnitServiceTables - connUnitSnsTable 1.3.6.1.3.94.5.2.1 - connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 - connUnitSnsId - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 224
of 3-14. 3 (hub) Passive connectivity unit supporting loop protocol. 4 (switch) Active connectivity unit supporting multiple protocols. 5 (gateway) Unit that not only (module) Subcomponent of a system. 13 (swdriver) Software driver. 14 (storage-access-device) Provides storage management and access - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 225
stand-alone system. A connectivity unit entry containing objects for a particular unit. Read only This object indicates the WWN of the switch. The Brocade implementation maps the switch WWN to the first 8 octets of this object and sets the remaining 8 octets to 0. Fabric OS MIB Reference 205 53 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 226
if the Ethernet is a replaceable PCCard, the hub should have an independent ID. The Brocade implementation maps the switch WWN to the top 8 octets of this variable and sets the remaining lower 8 octets to 0. For example: If Brocade's switch WWN is 10:0:0:60:69:10:02:18, then use the SNMP GET command - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 227
32 ports 16 ports Brocade 7800 Extension Switch 24 ports Brocade 8000 Brocade Encryption Switch Brocade DCX Brocade DCX-4S Brocade 48000 32 ports 32 ports 640 ports 320 ports 384 ports Brocade 6505 24 ports Brocade 6510 Brocade 6520 Brocade DCX 8510-4 Backbone Brocade DCX 8510-8 Backbone 48 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 228
return all bits to one. Set to the switch domain ID (as per FC-SW). For a Brocade Access Gateway device, the value is hard coded as "11 11 11". A Brocade Access Gateway does not have a domain ID. changed. NOTE: This object is not supported. 208 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 229
Read-write connUnitInfo 1.3.6.1.3.94.1.6.1.21 Read-write The sysuptime information for connUnitConfigurationChangeTime NOTE: This object is not supported. The number of revisions in connUnitRevsTable. Set . For a Fabric switch set to sysDescr and read only. For a Brocade Access Gateway device set - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 230
cannot be used to perform meaningful Fibre Channel work. • onlineConnUnit (6): Enable switch. The addressed unit puts itself into an implementation-dependant online state. In of events currently in connUnitEventTable. Fabric OS currently supports 1024 raslog events. Maximum number of events that - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 231
of the revisions supported by connectivity units managed by this agent. Usage Notes This table lists the versions of hardware and software elements in the switch. One entry for the hardware platform version and another entry for the Fabric OS version. For example, for the Brocade 4100 the hardware - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 232
is a keyword. • airflow (7) • frequency (8) • power (9) • door (10) - Not supported in Fabric OS v2.6.1. Generic information on ports for a specific connUnit NOTE: Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported. 212 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 233
in virtual fabrics. Brocade 300 Brocade 4100 Brocade 4900 Brocade 5000 Brocade 5100 Brocade 5300 Brocade 7500 or 7500E Brocade 7600 Brocade 7800 Extension Switch Brocade 8000 Brocade Encryption Switch Brocade DCX Brocade DCX-4S Brocade 48000 Brocade 6505 Brocade 6510 Brocade 6520 Brocade DCX 8510 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 234
this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway, both the F_Port and N_Port this value is 0x0008. An Access Gateway supports class-three services only, therefore the value is 8 for both port types. connUnitPortFCClassCap attribute is dependent on the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 235
, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway both the F_Port and N_Port this value is 0x0008. A Brocade Access Gateway supports class-three services only, therefore the value is 8 for both port types. connUnitPortFCClassOp is independent of the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 236
• longwaveNoOFC (8) • shortwaveNoOFC (9) • longwaveLED (10) • ssa (11) (Not supported in Fabric OS v2.6.1.) For an external FC port, this value should be 9 (shortwaveNoOFC port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port numbers 0 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 237
the FL_Port. For a U or E_Port, this is similar to F_Port. The FC ID is formatted "DD AA PP" (for example, "02 00 02"). The Brocade Access Gateway port FC ID differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a different AA value for each link. The - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 238
these values on a SET. If the management station uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch. • Disabling the FC port that is connected to the management station • Disabling the embedded port - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 239
7600 16 ports Brocade 7800 Extension Switch 24 ports Brocade 8000 32 ports Brocade Encryption Switch 32 ports Brocade DCX 640 ports Brocade DCX-4S 320 ports Brocade 48000 384 ports Brocade 6505 24 ports Brocade 6510 48 ports Brocade 6520 96 ports Brocade DCX 8510-4 Backbone - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 240
.1.10.1.21 connUnitPortNodeWwn • 16 = VI • 32 = FICON This is the bit mask that specifies the driver level protocols that are currently operational. Return value = 07F If this is not applicable, the same as the switch. The N_Ports on a Brocade Access Gateway are the WWN of the switch (that is, it - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 241
, and information should be reported in this table. This table contains the 1024 most-recent event log entries. Only external RASlog messages are supported. Fabric OS v4.4.0 and later releases do not have Panic or Debug level messages. All external messages are documented in the Fabric OS Message - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 242
9 Connectivity unit group TABLE 75 Object and OID connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 connUnitEventType 1.3.6.1.3.94.1.11.1.7 connUnitEventObject 1.3.6.1.3.94.1.11.1.8 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 Access Read only Description This is - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 243
agent from this connectivity unit to other connectivity units- X is switch data and Y is other end. The link table is intended (local) and the Y (remote) values need to have one valid value. A Brocade Access Gateway has no ISLs (InterSwitch Links); therefore all F_Port and N_Port connections display - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 244
node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID. ISL- WWN of the remote switch. Device- Node name of the device. The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1. If the value is nonnegative then it - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 245
only Read only Read only Description Type of the FC connectivity unit, as defined in connUnitType. • ISL- Switch device. • End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs. Table 76 displays the types of the connectivity unit. This is the Fibre Channel ID of this - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 246
This is the sum of all classes. If you cannot keep the by-class counters, then keep the sum counters. NOTE: This object is not supported. connUnitPortStatCountP BSYFrames 1.3.6.1.3.94.4.5.1.11 Read only The number of times that PBSY was returned to this port as a result of a frame that could not - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 247
statistic. Brocade does not support Class 1 Frames. Return value- 800000000 NOTE: This object is not supported. connUnitPortStatCountCl 21 The number of Class 2 Frames transmitted out this port. This is a Fibre Channel only statistic. Return value - 800000000 NOTE: This object is not supported - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 248
Frame that was rejected by the fabric. This is a Fibre Channel only statistic. Return value - 800000000 NOTE: This object is not supported. connUnitPortStatCountCl Read only ass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 The number of times that FRJT was returned to this port as a result of a Class 2 Frame - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 249
of offline primitive sequence received at this port. This is a Fibre Channel only statistic. Return Value - 800000000 NOTE: This object is not supported. connUnitPortStatCountLi Read only The number of link failures. This count is part of the Link Error Status nkFailures Block (LESB). (FC-PH 29 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 250
Not accessible This table contains an entry for each object registered with this port in the switch. Implementation of the Connectivity Unit Service Tables group is mandatory for all systems. A Brocade Access Gateway has no name server information; therefore this table is disabled. Not The simple - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 251
Service group 9 TABLE 78 Object and OID Access Description connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 Read only The physical port number of this SNS table entry. Each physical port has an SNS table with 1-n entries indexed by connUnitSnsPortIdentifier (port address). Chassis switches - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 252
1.3.6.1.3.94.2.3.1.2 trapRegFilter 1.3.6.1.3.94.2.3.1.3 trapRegRowState 1.3.6.1.3.94.2.3.1.4 Access Read only Read only Description The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. The current number of rows in the trap table. Not accessible A table - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 253
. Set to 0300. Unsupported tables The Connectivity Unit Port Statistics Fabric Table (connUnitPortStatTable) is supported in FOS v2.6.1, v5.x, and v6.0 and later versions. Brocade does not support the following: • Connectivity Unit Port Statistics Hub Table • Connectivity Unit Port Statistics SCSI - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 254
information on how the switch status is determined, refer to the Fabric Watch Administrator's Guide. A connUnit has been = null connUnitEventDescr.16.0.0.96.105.144.109.136. 0.0.0.0.0.0.0.0.354 = FW-1425 Switch status changed from MARGINAL to HEALTHY. For more information, refer to "swEventTrap". - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 255
94.0.6 connUnitPortStatus connUnitPortState For information on configuring thresholds that generate these traps, refer to the Fabric Watch Administrator's Guide. Overall status of the connectivity unit changed. Recommended severity level (for filtering)- alert. This trap sends the instance - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 256
9 FibreAlliance MIB traps 236 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 257
Chapter FibreAlliance Extension MIB Objects 10 In this chapter •FibreAlliance extension MIB overview 237 •SFP statistics table 239 •Port configuration table for Fabric Assigned PWWN feature 239 •Port configuration table for encryption or compression feature 240 FibreAlliance extension MIB - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 258
10 FibreAlliance extension MIB overview - faExt (1.3.6.1.4.1.1588.2.1.1.1.28) - swSfpStatTable (1.3.6.1.4.1.1588.2.1.1.1.28.1) - swSfpStatEntry 1.3.6.1.4.1.1588.2.1.1.1.28.1.1 - swSfpTemperature 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.1 - swSfpVoltage 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.2 - swSfpCurrent - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 259
SFP statistics table 10 SFP statistics table TABLE 85 Object and OID Access Description swSfpStatTable Not This table represents the diagnostic statistics of Small Form-factor 1.3.6.1.4.1.1588.2.1.1.1.28.1 accessible Pluggable (SFP) optical transceivers. swSfpStatEntry Not An entry - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 260
not enabled for compression. swPortCipherKeySize Read only 1.3.6.1.4.1.1588.2.1.1.1.28.3. 1.3 The object represents the cipher key size. Fabric OS supports 256 bytes per key. swPortCipherMode Read only 1.3.6.1.4.1.1588.2.1.1.1.28.3. 1.4 The object represents the cipher mode. Valid values - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 261
connectivity unit port table 10 Switch connectivity unit port table TABLE 88 Object and OID swConnUnitPortTable 1.3.6.1.4.1.1588.2.1.1.1.28.4 swConnUnitPortEntry 1.3.6.1.4.1.1588.2.1.1.1.28.4.1 swConnUnitPortCapableSpeeds 1.3.6.1.4.1.1588.2.1.1.1.28.4.2 swConnUnitPortSpeedMode 1.3.6.1.4.1.1588 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 262
10 Switch connectivity unit port table 242 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 263
come directly from the MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The following FCIP MIB tables are supported. • FCIP entity instance table • FCIP link table • FCIP TCP connection table • FCIP extended link table - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 264
11 FCIP MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig + fcipEntityInstanceTable .4 + fcipLinkTable .5 + fcipTcpConnTable .6 FIGURE 78 High level organization - fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 fcipEntityId - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 265
blade: • ipif 0 in FCIP GbE port 0/ge0 Example for Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade: • Circuit 0 in FCIP VE port 12 The type of Internet address by which the entity is reachable. Only address types IPv4 and IPv6 are supported. Fabric OS MIB Reference 245 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 266
protection against sequence number wrap Not used. An indication of whether the FCIP Entity supports PHB IP quality of service (QoS). Not Used. This object specifies the operational status of the row. This object will support "read-only" access and the status will be "active" for all entries. FCIP - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 267
value of sysUpTime when this entry was last created. 1.3.6.1.2.1.224.1.1.5.1.12 FCIP TCP connection table This table is supported only for Brocade 7500 and FR4-18i router blade. TABLE 91 Object and OID Access Description fcipTcpConnTable 1.3.6.1.2.1.224.1.1.6 fcipTcpConnEntry 1.3.6.1.2.1.224 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 268
the number of packets lost for FC control traffic and data transfer over an FCIP tunnel. NOTE: This object is not supported. fcipExtendedLinkCompressi onRatio 1.3.6.1.4.1.1588.4.1.1.4 Read only The ratio between compressed bytes and raw bytes over an FCIP tunnel. fcipExtendedLinkTcpSmooth edRTT - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 269
latency details. This table also gives details about FCIP circuit statistics for the Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade. This table is not supported for the Brocade 7500 or FR4-18i router blade. Corresponding CLI command: portshow fcipcircuit -t/-q -perf fcipConnStatsEntry - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 270
11 FCIP connection statistics table 250 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 271
directly from the MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The following iSCSI MIB tables are supported: • iSCSI Instance Attributes table • iSCSI Node Attributes table • iSCSI Session Attributes table • iSCSI - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 272
12 iSCSI MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - iscsimibmodule - iscsiObjects - iscsiInstance + iscsiInstanceAttributesTable - iscsiPortal - iscsiTargetPortal - iscsiInitiatorPortal - iscsiNode + iscsiNodeAttributesTable - iscsiTarget - iscsiTgtAuthorization - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 273
1.3.6.1.2.1.142.1.1.10.1.1.19 iscsiSsnErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.10.1.1.20 iscsiSsnErrorDiscontinuityTime 1.3.6.1.2.1.142.1.1.10.1.1.21 FIGURE 87 iscsiSessionAttributesTable hierarchy - iscsiSessionsStatsEntry iscsiSsnCmdPDUs 1.3.6.1.2.1.142.1.1.10.2.1.1 iscsiSsnRspPDUs 1.3.6.1.2.1.142 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 274
reboots.This value is not accessible. iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 Read only A UTF-8 string to describe the iSCSI instance. Only a single instance is supported so the value will be 0. When used with multiple iSCSI instances, it may be used in an implementation dependent manner to - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 275
a discontinuity in one or more counters used by this instance. NOTE: This object is not supported. iSCSI node attributes table This table is a list of iSCSI nodes per each iSCSI instance present into a set of addresses through various discovery services. Fabric OS MIB Reference 255 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 276
The maximum number of bytes that can be sent within a single sequence of data-in or data-out PDUs. NOTE: This object is not supported. iscsiNodeMaxConnections 1.3.6.1.2.1.142.1.1.5.1.1.11 Read-write The maximum number of connections allowed in each session to or from this node. Hard coded to two - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 277
SysUpTime at the most recent occurrence of a discontinuity in one or more counters used by this node. NOTE: This object is not supported. iscsiNodeStorageType 1.3.6.1.2.1.142.1.1.5.1.1.18 Read-write The storage type for all read-write objects within this row. Rows in this table are always created - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 278
is being used only for discovery. The maximum number of outstanding requests-to-transmit (R2Ts) per iSCSI task within this session. The maximum length supported for unsolicited data sent within this session. The maximum number of bytes that can be sent within a single sequence of Data-In or Data - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 279
20 iscsiSsnErrorDiscontinuityTime Read only 1.3.6.1.2.1.142.1.1.10.1.1.21 False indicates that iSCSI data PDUs initialized to the current value of SysUpTime. NOTE: This object is not supported. iSCSI session statistics table The isciSessionStatsTable contains performance statistics based on iSCI - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 280
has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime. NOTE: This object is not supported. iSCSI connection attributes table The isciConnectionAttributesTable contains a list of active connections within each session. TABLE 98 Object and OID - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 281
th PDUs able to be received on this connection. 1.3.6.1.2.1.142.1.1.11.1.1.10 iscsiCxnMaxXmitDataSegLengt Read only The maximum data payload size supported for command or data h PDUs able to be sent on this connection.The value is 1.3.6.1.2.1.142.1.1.11.1.1.11 min(iscsiCxnMaxRecvDataSegLength - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 282
12 iSCSI connection attributes table 262 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 283
MIB variables in this chapter come directly from the SNMPv2 MIB itself. The notes that follow the descriptions refer to Brocade-specific information and are provided by Brocade. SNMPv2 MIB object hierarchy Figure 90 through Figure 93 depict the organization and structure of SNMPv2 MIB. - iso - org - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 284
13 SNMP target address table - snmpTargetParamsTable 1.3.6.1.6.3.12.1.3 - snmpTargetParamsEntry 1.3.6.1.6.3.12.1.3.1 - snmpTargetParamsName 1.3.6.1.6.3.12.1.3.1.1 - snmpTargetParamsMPModel 1.3.6.1.6.3.12.1.3.1.2 - snmpTargetParamsSecurityModel 1.3.6.1.6.3.12.1.3.1.3 - snmpTargetParamsSecurityName - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 285
return an inconsistentValue error if an attempt is made to set this variable to a value for a security model which the implementation does not support. The security name which identifies the principal on whose behalf the SNMP messages will be generated using this entry. Fabric OS MIB Reference 265 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 286
13 SNMP community table TABLE 100 Object and OID Access Description snmpTargetParamsSecurityLevel 1.3.6.1.6.3.12.1.3.1.5 snmpTargetParamsStorageType 1.3.6.1.6.3.12.1.3.1.6 snmpTargetParamsRowStatus 1.3.6.1.6.3.12.1.3.1.7 Read create Read create Read create The level of security to be used when - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 287
SNMP community table 13 TABLE 101 Object and OID Access snmpCommunityContextEngineID Read create 1.3.6.1.6.3.18.1.1.1.4 snmpCommunityContextName 1.3.6.1.6.3.18.1.1.1.5 Read create snmpCommunityTransportTag 1.3.6.1.6.3.18.1.1.1.6 Read create snmpCommunityStorageType 1.3.6.1.6.3.18.1.1.1.7 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 288
13 SNMP community table 268 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 289
this chapter come directly from the SNMP-USER-BASED-SM-MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 94 and Figure 95 depict the organization and structure of the usmMIBObjects MIB. - iso - org - dod - internet - snmpV2 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 290
14 USM statistics - usmMIBObjects (1.3.6.1.6.3.15.1) - usmStats 1.3.6.1.6.3.15.1.1 - usmStatsUnsupportedSecLevels 1.3.6.1.6.3.15.1.1.1 - usmStatsNotInTimeWindows 1.3.6.1.6.3.15.1.1.2 - usmStatsUnknownUserNames 1.3.6.1.6.3.15.1.1.3 - usmStatsUnknownEngineIDs 1.3.6.1.6.3.15.1.1.4 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 291
engine identified by usmUserEngineID, can be protected from disclosure, and if so, the type of privacy protocol which is used. No support for Privacy protocols other than DES in this object. usmUserPrivKeyChange Read create 1.3.6.1.6.3.15.1.2.2.1.9 An object, which when modified, causes the secret - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 292
14 USM user group TABLE 103 Object and OID Access usmUserOwnPrivKeyCha nge 1.3.6.1.6.3.15.1.2.2.1.1 0 Read create usmUserPublic 1.3.6.1.6.3.15.1.2.2.1.1 1 Read create usmUserStorageType 1.3.6.1.6.3.15.1.2.2.1.1 2 Read create usmUserStatus 1.3.6.1.6.3.15.1.2.2.1.1 3 Read create Description - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 293
variables in this chapter come directly from the IEEE 802.1x PAE MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 96 through Figure 98 depict the organization and structure of the IEEE 802.1x PAE MIB. - iso - std - iso8802 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 294
15 IEEE 802.1x PAE MIB objects overview - dot1xPaeAuthenticator - dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 - dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 - dot1xAuthPaeState 1.0.8802.1.1.1.1.2.1.1.1 - dot1xAuthBackendAuthState 1.0.8802.1.1.1.1.2.1.1.2 - dot1xAuthAdminControlledDirections 1.0.8802 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 295
port number associated with this port. The protocol version associated with this port. Indicates the PAE functionality that this port supports and that may be managed through this MIB. Valid values: • dot1xPaePortAuthCapable (0) • dot1xPaePortSuppCapable (1) The initialization control for this port - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 296
15 Dot1x PAE authenticator group Dot1x PAE authenticator group TABLE 105 object and OID Access Description dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 Not accessible dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 Not accessible dot1xAuthPaeState Read only 1.0.8802.1.1.1.1.2.1.1.1 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 297
Dot1x PAE authenticator group 15 TABLE 105 object and OID Access Description dot1xAuthServerTimeout Read-write 1.0.8802.1.1.1.1.2.1.1.1 0 dot1xAuthMaxReq Read-write 1.0.8802.1.1.1.1.2.1.1.1 1 dot1xAuthReAuthPeriod Read-write 1.0.8802.1.1.1.1.2.1.1.1 2 dot1xAuthReAuthEnable d 1.0.8802 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 298
15 Dot1x PAE authenticator group TABLE 105 object and OID Access Description dot1xAuthInvalidEapolFr Read only amesRx 1.0.8802.1.1.1.1.2.2.1.9 dot1xAuthEapLengthErro rFramesRx 1.0.8802.1.1.1.1.2.2.1.1 0 Read only dot1xAuthLastEapolFram eVersion 1.0.8802.1.1.1.1.2.2.1.1 1 Read only - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 299
Dot1x PAE authenticator group 15 TABLE 105 object and OID Access Description dot1xAuthAuthEapLogoff Read only WhileAuthenticating 1.0.8802.1.1.1.1.2.3.1.9 dot1xAuthAuthReauthsW hileAuthenticated 1.0.8802.1.1.1.1.2.3.1.1 0 Read only dot1xAuthAuthEapStarts WhileAuthenticated 1.0.8802 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 300
(2) • supplicantRestart (3) • reauthFailed (4) • authControlForceUnauth (5) • portReInit (6) • portAdminDisabled (7) • notTerminatedYet (999) The user name representing the identity of the supplicant PAE. NOTE dot1xPaeSupplicant group is not supported. 280 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 301
of the MIB variables in this chapter come directly from the LLDP MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 99 through Figure 103 depict the organization and structure of the LLDP MIB. Fabric OS MIB Reference 281 53 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 302
16 LLDP MIB objects overview - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpNotifications - lldpObjects - lldpConfiguration - lldpMessageTxInterval - lldpMessageTxHoldMultiplier - lldpReinitDelay - lldpTxDelay - lldpNotificationInterval - lldpPortConfigTable - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 303
LLDP MIB objects overview 16 - lldpStatistics - lldpStatsRemTablesLastChangeTime 1.0.8802.1.1.2.1.2.1 - lldpStatsRemTablesInserts 1.0.8802.1.1.2.1.2.2 - lldpStatsRemTablesDeletes 1.0.8802.1.1.2.1.2.3 - lldpStatsRemTablesDrops 1.0.8802.1.1.2.1.2.4 - lldpStatsRemTablesAgeouts 1.0.8802.1.1.2.1.2.5 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 304
for LLDP configuration, statistics, local system data and remote systems data components. NOTE LLDP notifications are not supported. LLDP configuration group TABLE 106 object and OID lldpConfiguration 1.0.8802.1.1.2.1.1 lldpMessageTxInterval 1.0.8802.1.1.2.1.1.1 Access Not accessible Read-write - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 305
16 LLDP MIB TABLE 106 object and OID Access lldpMessageTxHoldMulti Read-write plier 1.0.8802.1.1.2.1.1.2 lldpReinitDelay 1.0.8802.1.1.2.1.1.3 Read-write lldpTxDelay 1.0.8802.1.1.2.1.1.4 Read-write lldpNotificationInterval 1.0.8802.1.1.2.1.1.5 Read-write lldpPortConfigTable 1.0.8802 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 306
. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. This table is not supported. LLDP statistics group TABLE 107 object and OID Access Description lldpStatistics 1.0.8802.1.1.2.1.2 Not LLDP statistics group. accessible lldpStatsRemTablesLastCha Read - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 307
that LLDP header formatting problems may exist with the local LLDP agent in the sending system or that LLDPDU validation problems may exist with the identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same value of - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 308
The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object. lldpLocManAddrTable 1.0.8802.1.1.2.1.3.8 Not This table contains management - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 309
1.0.8802.1.1.2.1.4.1.1.10 system. lldpRemSysCapSupported Read only The bitmap value used to identify which system capabilities are 1.0.8802.1.1.2.1.4.1.1.11 supported on the remote system. lldpRemSysCapEnabled Read only The bitmap value used to identify which system capabilities are enabled - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 310
16 LLDP MIB TABLE 109 object and OID Access Description lldpRemManAddr 1.0.8802.1.1.2.1.4.2.1.2 Not The string value used to identify the management address component accessible associated with the remote system. The purpose of this address is to contact the management entity. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 311
LLDP-EXT-DOT1-MIB 16 LLDP-EXT-DOT1-MIB The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. LLDP-EXT-DOT1-MIB organization Figure 104 and Figure 105 depict the organization and structure of the LLDP-EXT-DOT1-MIB. - iso - std - iso8802 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 312
16 LLDP-EXT-DOT1-MIB - lldpXdot1ConfigPortVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.1 - lldpXdot1ConfigPortVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.1.1 - lldpXdot1ConfigPortVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.1.1.1 - lldpXdot1ConfigVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.1.2 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 313
LLDP-EXT-DOT1-MIB 16 lldpXdot1 configuration group TABLE 110 object and OID Access Description lldpXdot1Config 1.0.8802.1.1.2.1.5.329 62.1.1 Not IEEE 802.1 configuration group. accessible lldpXdot1ConfigPortVlan Table 1.0.8802.1.1.2.1.5.329 62.1.1.1 Not accessible A table that controls - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 314
VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation. This object displays zero although the TE interfaces are associated with VLANS. NOTE: This object takes the value from the PVID - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 315
the port and protocol VLANs are enabled on the given port associated with the local system. If fcoeport is configured then that interface supports protocol-based VLAN and lldpXdot1LocProtoVlanEnabled should return true (1). This is the local property of the interface and it does not depend on - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 316
port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port port (associated with the remote system) is capable of supporting port and protocol VLANs. lldpXdot1RemProtoVlanE nabled 1.0.8802.1.1.2.1.5.329 62 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 317
LLDP-EXT-DOT3-MIB 16 TABLE 112 object and OID Access Description lldpXdot1RemVlanName 1.0.8802.1.1.2.1.5.329 62.1.3.3.1.2 Read only The string value used to identify VLAN name identified by the VLAN ID associated with the remote system. lldpXdot1RemProtocolTa ble 1.0.8802.1.1.2.1.5.329 62 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 318
16 LLDP-EXT-DOT3-MIB - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpObjects - lldpExtensions - lldpXdot3MIB - lldpXdot3Objects - lldpXdot3Config - lldpXdot3PortConfigTable - lldpXdot3LocalData - lldpXdot3LocPortTable - lldpXdot3LocPowerTable - lldpXdot3LocLinkAggTable - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 319
.1.1.2.1.5.462 3.1.2.1.1.1 Read only The truth value used to indicate whether the given port (associated with the local system) supports auto-negotiation. lldpXdot3LocPortAutoNe gEnabled 1.0.8802.1.1.2.1.5.462 3.1.2.1.1.2 Read only The truth value used to indicate whether port auto-negotiation - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 320
the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and if it does not support link aggregation, this value should be set to zero. lldpXdot3LocMaxFrameS izeTable 1.0.8802.1.1.2.1.5.462 3.1.2.4 Not accessible This table contains one row per port of - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 321
8802.1.1.2.1.5.462 3.1.3.1.1.1 Read only The truth value used to indicate whether the given port (associated with remote system) supports auto-negotiation. lldpXdot3RemPortAutoN egEnabled 1.0.8802.1.1.2.1.5.462 3.1.3.1.1.2 Read only The truth value used to indicate whether port auto-negotiation - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 322
frame size information about a particular port component. lldpXdot3RemMaxFrame Size 1.0.8802.1.1.2.1.5.462 3.1.3.4.1.1 Read only An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. 302 Fabric OS MIB Reference 53 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 323
in this chapter come directly from the IEEE 802.3 LAG MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 108 through Figure 113 depict the organization and structure of the IEEE 802.3 LAG MIB. - iso - member-body - us - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 324
19 - dot3adAggPortActorAdminState 1.2.840.10006.300.43.1.2.1.1.20 - dot3adAggPortActorOperState 1.2.840.10006.300.43.1.2.1.1.21 - dot3adAggPortPartnerAdminState 1.2.840.10006.300.43.1.2.1.1.22 - dot3adAggPortPartnerOperState 1.2.840.10006.300.43.1.2.1.1.23 - dot3adAggPortAggregateOrIndividual - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 325
Aggregator group 17 - dot3adAggPortStatsTable 1.2.840.10006.300.43.1.2.2 - dot3adAggPortStatsEntry 1.2.840.10006.300.43.1.2.2.1 - dot3adAggPortStatsLACPDUsRx 1.2.840.10006.300.43.1.2.2.1.1 - dot3adAggPortStatsMarkerPDUsRx 1.2.840.10006.300.43.1.2.2.1.2 - dot3adAggPortStatsMarkerResponsePDUsRx 1.2. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 326
the local system. The current operational value of the key for the aggregator's current protocol partner. This is a 16-bit value. If the aggregation is manually configured, this key value will be a value assigned by the local System. The value of this 16-bit read-write attribute defines the maximum - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 327
value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. NOTE: This object is not supported. Fabric OS MIB Reference 307 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 328
is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol partner. NOTE: This object is not supported. dot3adAggPortPartnerAd minKey 1.2.840.10006.300.43.1. 2.1.1.10 Read-write The current - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 329
partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol actor in LACP PDUs. dot3adAggPortActorOperS tate 1.2.840.10006.300.43.1. 2.1.1.21 Read only A string of 8 bits, corresponding to the current - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 330
17 Aggregator port group TABLE 117 object and OID Access Description dot3adAggPortStatsIllegal Rx 1.2.840.10006.300.43.1. 2.2.1.5 Read only The number of frames received that carry the Slow Protocols Ethernet Type value (43B.4), but contain a badly formed PDU or an illegal value of Protocol - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 331
Aggregator port group 17 TABLE 117 object and OID Access Description dot3adAggPortDebugActor ChurnState 1.2.840.10006.300.43.1. 2.3.1.5 Read only The state of the Actor Churn detection machine (43.4.17) for the aggregation port. Valid values: • noChurn - Indicates that the state machine is in - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 332
17 Aggregator port group 312 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 333
in this chapter come directly from the MIB-II itself. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 114 through Figure 118 depict the organization and structure of the Bridge-MIB. - iso - org - dod - internet - directory - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 334
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - dot1dNotifications 1.3.6.1.2.1.17.0 - dot1d base group - dot1dBaseBridgeAddress 1.3.6.1.2.1.17.1.1 - dot1dBaseNumPorts 1.3.6.1.2.1.17.1.2 - dot1dBaseType 1.3.6.1.2.1.17.1.3 - dot1dStp group - dot1dStpProtocolSpecification 1.3.6.1.2.1.17.2.1 - - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 335
Bridge-MIB overview 18 - dot1dBridge 1.3.6.1.2.1.17 - dot1dTp - dot1dTpPortOverflowTable 1.3.6.1.2.1.17.4.6 - dot1dTpPortOverflowEntry 1.3.6.1.2.1.17.4.6.1 - dot1dTpPortInOverflowFrames 1.3.6.1.2.1.17.4.6.1.1 - dot1dTpPortOutOverflowFrames 1.3.6.1.2.1.17.4.6.1.2 - dot1dTpPortInOverflowDiscards - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 336
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - qBridgeMIB - qBridgeMIBObjects - dot1qBase - dot1qVlanVersionNumber 1.3.6.1.2.1.17.7.1.1.1 - dot1qMaxVlanId 1.3.6.1.2.1.17.7.1.1.2 - dot1qMaxSupportedVlans 1.3.6.1.2.1.17.7.1.1.3 - dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 - dot1qGvrpStatus - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 337
1.3.6.1.2.1.17.2.19.1.4 - dot1dStpPortOperPointToPoint 1.3.6.1.2.1.17.2.19.1.5 - dot1dStpPortAdminPathCost 1.3.6.1.2.1.17.2.19.1.6 FIGURE 118 RSTP hierarchy Bridge-MIB The Bridge MIB module for managing devices that support IEEE 802.1D. Fabric OS MIB Reference 317 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 338
if a newRoot notification is sent for the same transition. dot1d base group This contains the objects that are applicable to all types of bridges (support only for default VLAN). TABLE 119 Object and OID Access Description dot1dBase 1.3.6.1.2.1.17.1 Not The OID sub-tree in the Bridge MIB for - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 339
the (8 octet long) bridge ID). The other (last) 6 octets of the bridge ID are given by the value of dot1dBaseBridgeAddress. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0 through 61440, in steps of 4096. dot1dStpTimeSinceTopol Read only ogyChange 1.3.6.1.2.1.17.2.3 The - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 340
byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16. 320 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 341
-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. This object replaces dot1dStpPortPathCost to support IEEE 802.1t. dot1dTp group Implementation of the dot1dTp sub-tree is optional. It is implemented by those bridges that - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 342
18 Bridge-MIB TABLE 121 Object and OID dot1dTpFdbTable 1.3.6.1.2.1.17.4.3 dot1dTpFdbEntry 1.3.6.1.2.1.17.4.3.1 dot1dTpFdbAddress 1.3.6.1.2.1.17.4.3.1.1 dot1dTpFdbPort 1.3.6.1.2.1.17.4.3.1.2 dot1dTpFdbStatus 1.3.6.1.2.1.17.4.3.1.3 dot1dTpPortTable 1.3.6.1.2.1.17.4.4 dot1dTpPortEntry 1.3.6.1.2.1.17 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 343
frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. NOTE: This object is not supported. dot1dStaticStatus 1.3.6.1.2.1.17.5.1.1.4 Read create This object indicates the status of this entry. Values: • other (1) - This entry is currently in use - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 344
Group Registration defined by IEEE 802.1t-2001. The following tables are not supported: • dot1dTpHCPortTable • dot1dUserPriorityRegenTable • dot1dTrafficClassTable • dot1dPortOutboundAccessPriorityTable • dot1dPortGarpTable • dot1dPortGmrpTable TABLE 123 Object and OID Access Description - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 345
ability to override the default PVID setting and its egress status (VLAN-tagged or untagged) on each port. • dot1dLocalVlanCapable (7) - Can support multiple local bridges, outside of the scope of 802.1Q defined VLANs. dot1dTrafficClassesEnable d 1.3.6.1.2.1.17.6.1.1.2 Read-write The value true - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 346
native user priority. 1.3.6.1.2.1.17.6.1.2.1.1.1 dot1dPortNumTrafficClass es 1.3.6.1.2.1.17.6.1.2.1.1.2 Read-write The number of egress traffic classes supported on this port. This object may optionally be read only. Q-Bridge MIB The VLAN Bridge MIB module for managing Virtual Bridged Local - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 347
18 Q-Bridge MIB TABLE 126 Object and OID dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 dot1qGvrpStatus 1.3.6.1.2.1.17.7.1.1.5 Access Description Read only The current number of IEEE 802.1Q VLANs that are configured in the device. Read-write The administrative status requested by management for GVRP. - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 348
18 Q-Bridge MIB TABLE 127 Object and OID Access Description dot1qTpFdbStatus 1.3.6.1.2.1.17.7.1.2.2.1.3 Read only The status of this entry. Values: • other (1) - This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 349
configured by the management in this VLAN for which the service requirement attribute Forward All Multicast Groups may not be dynamically by management in this VLAN for which the ForbiddenPorts service requirement attribute Forward Unregistered Multicast Groups 1.3.6.1.2.1.17.7.1.2.5.1.3 may - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 350
18 Q-Bridge MIB TABLE 128 Object and OID Access Description dot1qStaticUnicastStatus 1.3.6.1.2.1.17.7.1.3.1.1.4 Read-write This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 351
18 Q-Bridge MIB TABLE 128 Object and OID Access Description dot1qStaticMulticastForbid denEgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.4 Read-write The set of ports to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must not be forwarded, - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 352
18 Q-Bridge MIB TABLE 129 Object and OID Access Description dot1qVlanStatus 1.3.6.1.2.1.17.7.1.4.2.1.6 Read only This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 353
number of times the associated dot1qTpVlanPortInDiscards counter has overflowed. RSTP MIB The Bridge MIB Extension module for managing devices that support the Rapid Spanning Tree Protocol defined by IEEE 802.1w. TABLE 130 object and OID Access Description dot1dStpVersion 1.3.6.1.2.1.17.2.16 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 354
18 RSTP MIB TABLE 130 object and OID Access dot1dStpPortAdminEdge Read-write Port 1.3.6.1.2.1.17.2.19.1.2 dot1dStpPortOperEdgeP Read only ort 1.3.6.1.2.1.17.2.19.1.3 dot1dStpPortAdminPoint Read-write ToPoint 1.3.6.1.2.1.17.2.19.1.4 dot1dStpPortOperPointT Read only oPoint 1.3.6.1.2.1.17.2.19.1.5 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 355
this chapter come directly from the BD MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. This MIB module is for the Brocade Bottleneck Detection feature. Figure 119 through Figure 122 depict the organization and structure of the BD - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 356
19 BD Traps - bdConfig - bdStatus 1.3.6.1.4.1.1588.2.1.1.51.1.1 - bdLThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.2 - bdCThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.3 - bdQTime 1.3.6.1.4.1.1588.2.1.1.51.1.4 - bdWinAvgTime 1.3.6.1.4.1.1588.2.1.1.51.1.5 - bdThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.6 - nBdType - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 357
bdStatus Read only 1.3.6.1.4.1.1588.2.1.1.51.1.1 This object represents the status of bottleneck detection feature if enabled in the switch. Valid values: • true (1) • false (2) bdLThreshold Read only 1.3.6.1.4.1.1588.2.1.1.51.1.2 This object is the severity threshold for latency bottleneck - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 358
19 BD statistics TABLE 133 Object and OID Access Description bdNumOfEntries Read only 1.3.6.1.4.1.1588.2.1.1.51.2.1 The number of entries in the statistics table. bdStatsTable 1.3.6.1.4.1.1588.2.1.1.51.2. 2 Not accessible The table of stats entries represents both types of BD. This can - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 359
and end device variables 340 •SNMP configuration variables 340 •iSCSI instance information variables 341 Switch variables MIB variables that assist in monitoring or modifying the status of switches are in the following tables or groups. •connUnitTable 205 •connUnitRevsTable 211 •FIBRE-CHANNEL - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 360
assist in monitoring or modifying ISL and end devices are in the following tables or groups. ISL variables •connUnitLinkTable 223 •Switch Fabric group 149 End Device variables •connUnitLinkTable 223 •fcFxLoginTable 82 •swFCPortName 156 SNMP configuration variables MIB variables that assist in - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 361
iSCSI instance information variables A iSCSI instance information variables MIB variables that assist in gathering information about iSCSI instances are in the following tables. •iSCSI instance attributes table 254 •iSCSI node attributes table 255 •iSCSI session statistics table 259 Fabric OS - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 362
A iSCSI instance information variables 342 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 363
94.4.5.1.26 swConnUnitLCRX 1.3.6.1.4.1.1588.2.1.1.1.27.1.16 connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 Not supported connUnitPortStatCountTxMulticastObjects 1.3.6.1.3.94.4.5.1.30 swConnUnitRDYPriority 1.3.6.1.4.1.1588.2.1.1.1.27.1.17 connUnitPortStatCountBBCreditZero - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 364
B portErrShow command TABLE 134 portStatsShow command (Continued) Counters MIB Object MIB OID er64_enc_out er_bad_os er_rx_c3_timeout er_tx_c3_timeout er_c3_dest_unreach er_other_discard er_pcs_blk er_type1_miss er_type2_miss er_type6_miss er_zone_miss er_lun_zone_miss er_crc_good_eof - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 365
26 swConnUnitLCRX 1.3.6.1.4.1.1588.2.1.1.1.27.1.16 connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 Not supported connUnitPortStatCountTxMulticastObjects 1.3.6.1.3.94.4.5.1.30 swConnUnitRDYPriority 1.3.6.1.4.1.1588.2.1.1.1.27.1.17 connUnitPortStatCountBBCreditZero 1.3.6.1.3.94 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 366
Not supported stat64_PBSYFrames Not supported stat64_inputBuffersFull Not supported stat64_rxClass1Frames Not supported portShow .1.22 Timed_out swConnUnitTimedOut 1.3.6.1.4.1.1588.2.1.1.1.27.1.21 portState swConnUnitStateChange 1.3.6.1.4.1.1588.2.1.1.1.27.1.24 Tx_unavail - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 367
100 address translation group, 38 aggregator group, 305 aggregator port group, 307 B bd MIB, 335 before loading MIBs, 8 Bridge-MIB, 313 Brocade MIB files, 7 C capability group, 86, 101 commands, 20 errShow, 5 snmpConfig, 4, 20 switchStatusPolicySet, 5 configuration group, 77, 93 configuring SNMP, 20 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 368
DOT3-MIB, 297 LLDP-EXT-DOT3-MIB organization, 297 loading brocade MIBs, 7 M MIB loading order, 9 MIB-II object 333 RSTP MIB, 333 S sensor variables, 339 service group, 230 SNMP community table, 266 SNMP configuration switch group, 169 switch variables, 339 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 369
switchStatusPolicySet command, 5 sw-MIB system organization of MIB objects, 123 system group, 32, 141, 264 T TCP group, 45 textual conventions, 32, 59, 106, 189 toptalker group, 173 transmission group, 48 traps, 4 trunking group, 172 U UDP group, 47 understanding MIBs, 3 understanding SNMP bASICs, 2 - Dell Brocade 6520 | MIB Reference Supporting Fabric OS v7.1.0 - Page 370
350 Fabric OS MIB Reference 53-1002750-01
53-1002750-01
14 December 2012
®
Fabric OS
MIB Reference
Supporting Fabric OS v7.1.0