Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 239

Connectivity unit group 9 TABLE 75 Object and OID connUnitPortControl 1.3.6.1.3.94.1.10.1.16 (continued) connUnitPortName 1.3.6.1.3.94.1.10.1.17 connUnitPortPhysicalNu mber 1.3.6.1.3.94.1.10.1.18 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 Access Read-write Read-write Read only Read only Description • Return values are: - resetConnUnitPort portDisable (F or E_Port, loop for U_Port) - bypassConnUnitPort portDisable (FL_Port) - unbypassConnUnitPort portEnable (FL_Port) - offlineConnUnitPort portDisable (E, F, FL_Port) - onlineConnUnitPort portEnable (U) - resetConnUnitPortCounters clear the port statistics counter. - when rebooted, this defaults to 1 (unknown). A string describing the addressed port. NOTE: This object is read only for Brocade switches. This is the internal port number by which this port is known. In many implementations, this should be the same as connUnitPortIndex. Some implementations might have an internal port representation not compatible with the rules for table indices. In these cases, provide the internal representation of this port in this object. This value might also be used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY objects of the connUnitLinkTable. The internal port numbers for Brocade switch. The Brocade switches support 0 through maximum number of ports. The maximum number of supported ports are as follows. Brocade 300 24 ports Brocade 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 5100 40 ports Brocade 5300 80 ports Brocade 7500 or 7500E 32 ports Brocade 7600 16 ports Brocade 7800 Extension Switch 24 ports Brocade 8000 32 ports Brocade Encryption Switch 32 ports Brocade DCX 640 ports Brocade DCX-4S 320 ports Brocade 48000 384 ports Brocade 6505 24 ports Brocade 6510 48 ports Brocade 6520 96 ports Brocade DCX 8510-4 Backbone 320 ports Brocade DCX 8510-8 Backbone 640 ports Brocade VA-40FC 40 ports This OID is deprecated. This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table. From this point, use the getnext command to get the next statistics object. When the first part of the OID changes, the end of table is reached. Mapped to connUnitPortStatFabricUnitId. Fabric OS MIB Reference 219 53-1002750-01