Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 164

6 Switch system group TABLE 45 Object and OID Access Description swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 Read-write The desired state of the flash. The host is specified in swFlashDLHost.0. In addition, the user name is specified in swFlashDLUser.0 and the file name specified in swFlashDLFile.0. Possible values are: • swCurrent (1) - The flash contains the current firmware image or configuration file. • swCfUpload (3) - The switch configuration file is to be uploaded to the host specified. • swCfDownload (4) - The switch configuration file is to be downloaded from the host specified. • swFwCorrupted (5) - The firmware in the flash is corrupted. This value is for informational purposes only; however, setting swFlashDLAdmStatus to this value is not allowed. For more information about the firmwareDownload, configDownload and configUpload commands, refer to the Fabric OS Command Reference. swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 Read-write The name or IP address (in dot notation) of the host to download or upload a relevant file to the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read only) for Fabric OS v4.4 and later. The value displayed is always NULL (zero-length).This is not supported in Fabric OS v6.0.0 and later versions. swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 Read-write The user name is used on the host for downloading or uploading a relevant file, to or from the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read only) for Fabric OS v4.4 and later. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and later versions. swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 Read-write The name of the file to be downloaded or uploaded. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read only) for Fabric OS v4.4 and later. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and later versions. swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 Read-write The password to be used for FTP transfer of files in the download or upload operation. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read only) for Fabric OS v4.4 and later. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and later versions. swBeaconOperStatus Read only 1.3.6.1.4.1.1588.2.1.1.1.1.18 The current operational status of the switch beacon. Possible values are: • on (1) - The LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. • off (2) - Each LED is in its regular status, indicating color and state. 144 Fabric OS MIB Reference 53-1002750-01