Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 171

Switch agent configuration group 6 TABLE 48 Object and OID Access Description swPmgrEventDescr Not This object identifies the textual description of the events mentioned in 1.3.6.1.4.1.1588.2.1.1.1 accessible swPmgrEventType. .2.14 swVfId Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.15 The virtual Fabric ID of the switch. swVfName Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.16 This represents the virtual switch name configured in the switch. Switch agent configuration group TABLE 49 Object and OID Access Description swAgtCfg Not 1.3.6.1.4.1.1588.2.1.1.1 accessible .4 swAgtCmtyTable Not 1.3.6.1.4.1.1588.2.1.1.1 accessible .4.11 swAgtCmtyEntry Not 1.3.6.1.4.1.1588.2.1.1.1 accessible .4.11.1 swAgtCmtyIdx Read only 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.1 swAgtCmtyStr Read-write 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.2 The OID sub-tree for switch agent configuration group. A table that contains, one entry for each community, the access control and parameters of the community. The table displays all of the community strings (read and write) if it is accessed by the "write" community string. Only "read" community strings are displayed if it is accessed by the "read" community string. In Secure Fabric OS, the community strings can only be modified on the primary switch. NOTE: This table is deprecated in Fabric OS v7.0. Use the tables snmpTargetAddrTable, snmpTargetParamsTable, snmpCommunityTable to get the required data. An entry containing the community parameters. The SNMPv1 community entry. The return value for this entry is 1 through 6. This is a community string supported by the agent. If a new value is set successfully, it takes effect immediately. Default values for communities are as follows: • 1 (Secret Code) • 2 (OrigEquipMfr) • 3 (private) • 4 (public) • 5 (common) • 6 (FibreChannel) Community strings 1-3 are read-write and strings 4-6 are read only. You can change the community setting using the snmpconfig command. Fabric OS MIB Reference 151 53-1002750-01