Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 350

18 Q-Bridge MIB TABLE 128 Object and OID Access Description dot1qStaticUnicastStatus 1.3.6.1.2.1.17.7.1.3.1.1.4 Read-write This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following values. • invalid (2) - Writing this value to the object removes the corresponding entry. • permanent (3) - This entry is currently in use and will remain so after the next reset of the bridge. • deleteOnReset (4) - This entry is currently in use and will remain so until the next reset of the bridge. • deleteOnTimeout (5) - This entry is currently in use and will remain so until it is aged out. dot1qStaticMulticastTable 1.3.6.1.2.1.17.7.1.3.2 Not accessible A table containing filtering information for multicast and broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific multicast and broadcast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for multicast and broadcast addresses only. dot1qStaticMulticastEntry 1.3.6.1.2.1.17.7.1.3.2.1 Not accessible Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this multicast or broadcast destination address are allowed to be forwarded. dot1qStaticMulticastAddre Not The destination MAC address in a frame to which this entry's filtering ss accessible information applies. This object must take the value of a multicast or 1.3.6.1.2.1.17.7.1.3.2.1.1 broadcast address. dot1qStaticMulticastReceiv ePort 1.3.6.1.2.1.17.7.1.3.2.1.2 Not accessible This object represents either the value zero or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. dot1qStaticMulticastStatic EgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.3 Read-write The set of port s to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must be forwarded, regardless of any dynamic information, for example, from GMRP. 330 Fabric OS MIB Reference 53-1002750-01