Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 27

Loading Brocade MIBs 1 The Brocade trap (SW-TRAP) can be configured to send traps using the snmpConfig command. For more information on this command, refer to Table 6 or the Fabric OS Command Reference. Object instances MIB objects are defined by the OID, which is the type of object, and by the instance number, which is an instance of that MIB object. A Fibre Channel port is a MIB object, and port 0 is an instance of that object. The following is an OID number and an instance number: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.5 where: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 is the OID (of swFCPortTxWords) and 5 is the instance ID for port 4. You must add 1 to the port number to get its instance number in SNMP because SNMP numbering starts at 1; switch port numbering starts at 0. Loading Brocade MIBs The Brocade MIB is a set of variables that are private extensions to the Internet standard MIB-II. The Brocade agents support many other Internet-standard MIBs. These standard MIBs are defined in RFC publications. To find specific MIB information, examine the Brocade proprietary MIB structure and the standard RFC MIBs supported by Brocade. Brocade MIB files The Brocade MIB files are as follows: • bd.mib • BRCD_REG.mib • BRCD_TC.mib • brcdfcip.mib • CPQ_HOST.mib • CPQ_RACK.mib • FA.mib • FICON.mib • HA.mib • IBMBladeCenterTrapMIB.mib • SW.mib • faext.mib Standard MIBs Distribution of standard MIBs has been stopped from Fabric OS v6.4.0. Download the following MIBs from the http://www.oidview.com/ website: Fabric OS MIB Reference 7 53-1002750-01