Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 26

1 Understanding SNMP basics SW traps There are fourteen specific traps defined in Brocade SW-TRAP. 1. swfault (no longer supported) 2. swSensorScn (no longer supported) 3. swFCPortScn This trap is generated by a port state change. 4. swEventTrap This trap is generated by any switch event reported to the system error log. The desired severity level is introduced to filter a swEvent trap based on the severity level. 5. swFabricWatchTrap This trap is generated when any Fabric Watch threshold is reached. The desired severity level is introduced to filter a swFabricWatchTrap based on the severity level. 6. swTrackChangesTrap This trap is generated by a login or a logout. 7. swIPv6ChangeTrap This trap is generated when an IPv6 address status change event occurs. It is generated only when IPv6 stateless state changes to the deprecation state and not for address change notification. 8. swPmgrEventTrap This trap is generated when any partition manager change happens. 9. swFabricReconfigTrap The trap to be sent for tracking fabric reconfiguration. 10. swFabricSegmentTrap The trap to be sent for tracking segmentation. 11. swExtTrap The trap adds the SSN binding to the traps if it is enabled. 12. swStateChangeTrap This trap is sent when the switch changes its state to online or offline. 13. swPortMoveTrap This trap is sent when the virtual ports are moved from one switch to another. 14. swBrcdGenericTrap This trap is sent for one of the events, such as fabric change, device change, FAPWWN change, and FDMI events. This trap is for Brocade use. 15. swDeviceStatusTrap This trap is sent whenever a device logs in or logs out. 6 Fabric OS MIB Reference 53-1002750-01