Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 67

UDP group 2 TABLE 13 Object and OID tcpConnState 1.3.6.1.2.1.6.13.1.1 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 tcpInErrs 1.3.6.1.2.1.6.14 tcpOutRsts 1.3.6.1.2.1.6.15 Access Read-write Read only Read only Description The state of this TCP connection. The only value that might be set by a management station is deleteTCB (12). Accordingly, it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value. If a management station sets this object to the value delete12 (TCB), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment might be sent from the managed node to the other TCP endpoint (note, however, that RST segments are not sent reliably). Valid values: • closed • listen • synSent (3) • synReceived (4) • established (5) • finWait1 (6) • finWait2 (7) • closeWait (8) • lastAck (9) • closing (10) • timeWait (11) • deleteTCB (12) NOTE: Fabric OS v3.1.x and v4.x do not allow the SET operation on this variable. The local IP address for this TCP connection. In the case of a connection in the listen state that is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used. The local port number for this TCP connection. Read only The remote IP address for this TCP connection. Read only The remote port number for this TCP connection. Read only Read only The total number of segments received in error (for example, bad TCP checksums). The number of TCP segments sent containing the RST flag. UDP group Implementation of the UDP group is mandatory for all systems that implement the UDP. Fabric OS MIB Reference 47 53-1002750-01