Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 165

Table 46, Table 47

Get Dell Brocade 6520 PDF manuals and user guides View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 165 highlights

Switch system group 6 TABLE 45 Object and OID Access Description swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 Read-write The desired status of the switch beacon. Possible values are: • on (1) - The LEDs on the front panel of the switch run alternately from left to right and right to left. Set the color to yellow. • off (2) - Set each LED to its regular status, indicating color and state. swDiagResult Read only 1.3.6.1.4.1.1588.2.1.1.1.1.20 The result of the power-on startup test (POST) diagnostics. Possible values are: • sw-ok (1) - The switch is okay. • sw-faulty (2) - The switch has experienced an unknown fault. • sw-embedded-port-fault (3) - The switch has experienced an embedded port fault. swNumSensors Read only 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply = 4). The value might vary depending on the switch model. For Fabric OS v6.1.0, if no sensor is available, this variable is assigned the value -1. swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 Not accessible Table of sensor entries. Table 46 lists the sensors on the Brocade switches. The sensors on the switches vary based on the blades. For the exact count of temperature sensors, refer to Table 47. swSensorEntry Not An entry of the sensor information. 1.3.6.1.4.1.1588.2.1.1.1.1.22 accessible .1 swSensorIndex Read only 1.3.6.1.4.1.1588.2.1.1.1.1.22 .1.1 The index of the sensor. The values are 1 through the value in swNumSensors swSensorType Read only 1.3.6.1.4.1.1588.2.1.1.1.1.22 .1.2 The type of sensor. swSensorStatus Read only 1.3.6.1.4.1.1588.2.1.1.1.1.22 .1.3 The current status of the sensor. Possible values are: • unknown (1) • faulty (2) • below-min (3) - The sensor value is below the minimal threshold. • nominal (4) • above-max (5) - The sensor value is above the maximum threshold. • absent (6) - The sensor is missing. For Temperature, valid values include 3 (below-min), 4 (nominal), and 5 (above-max). For Fan, valid values include 3 (below-min), 4 (nominal), and 6 (absent). For Power Supply, valid values include 2 (faulty), 4 (nominal), and 6 (absent). Fabric OS MIB Reference 145 53-1002750-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
Fabric OS MIB Reference
145
53-1002750-01
Switch system group
6
swBeaconAdmStatus
1.3.6.1.4.1.1588.2.1.1.1.1.19
Read-write
The desired status of the switch beacon.
Possible values are:
•
on (1) - The LEDs on the front panel of the switch run
alternately from left to right and right to left. Set the color to
yellow.
•
off (2) - Set each LED to its regular status, indicating color and
state.
swDiagResult
1.3.6.1.4.1.1588.2.1.1.1.1.20
Read only
The result of the power-on startup test (POST) diagnostics.
Possible values are:
•
sw-ok (1) - The switch is okay.
•
sw-faulty (2) - The switch has experienced an unknown fault.
•
sw-embedded-port-fault (3) - The switch has experienced an
embedded port fault.
swNumSensors
1.3.6.1.4.1.1588.2.1.1.1.1.21
Read only
The number of sensors inside the switch.
The Brocade DCX value is between 1 and 57 (temperature =50, fan
= 3, power supply = 4). The value might vary depending on the
switch model. For Fabric OS v6.1.0, if no sensor is available, this
variable is assigned the value -1.
swSensorTable
1.3.6.1.4.1.1588.2.1.1.1.1.22
Not
accessible
Table of sensor entries.
Table 46
lists the sensors on the Brocade switches.
The sensors on the switches vary based on the blades. For the
exact count of temperature sensors, refer to
Table 47
.
swSensorEntry
1.3.6.1.4.1.1588.2.1.1.1.1.22
.1
Not
accessible
An entry of the sensor information.
swSensorIndex
1.3.6.1.4.1.1588.2.1.1.1.1.22
.1.1
Read only
The index of the sensor.
The values are 1 through the value in swNumSensors
swSensorType
1.3.6.1.4.1.1588.2.1.1.1.1.22
.1.2
Read only
The type of sensor.
swSensorStatus
1.3.6.1.4.1.1588.2.1.1.1.1.22
.1.3
Read only
The current status of the sensor.
Possible values are:
•
unknown (1)
•
faulty (2)
•
below-min (3) - The sensor value is below the minimal
threshold.
•
nominal (4)
•
above-max (5) - The sensor value is above the maximum
threshold.
•
absent (6) - The sensor is missing.
For Temperature, valid values include 3 (below-min), 4 (nominal),
and 5 (above-max).
For Fan, valid values include 3 (below-min), 4 (nominal), and 6
(absent).
For Power Supply, valid values include 2 (faulty), 4 (nominal), and 6
(absent).
TABLE 45
Object and OID
Access
Description