Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 163

Switch system group 6 TABLE 45 Object and OID Access Description swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 Read only The current operational status of the switch. Possible values are: • online (1) - The switch is accessible by an external Fibre Channel port. • offline (2) - The switch is not accessible. • testing (3) - The switch is in a built-in test mode and is not accessible by an external Fibre Channel port. • faulty (4) - The switch is not operational. swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 Read-write The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Possible values are: • online (1) - Set the switch to be accessible by an external FC port. • offline (2) - Set the switch to be inaccessible. • testing (3) - Set the switch to run the built-in test. • faulty (4) - Set the switch to a "soft" faulty condition. • reboot (5) - Set the chassis to reboot in 1 second. • fastboot (6) - Set the chassis to fastboot in 1 second. Fastboot causes the chassis to boot but omit the POST. When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot For the Brocade 3250, 3850, 3900, 8000, 24000, 48000 and DCX director the testing (3) and faulty (4) values are not applicable. The possible values for Brocade 300, 5100 and 5300 are either online (1) or offline (2). swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 Read-write The desired administrative status of the Telnet shell. Setting this value to 1 (terminated), deletes the current Telnet shell task. When this variable instance is read, it reports the value last set through SNMP. This OID is supported in Fabric OS v2.x through v3.x. This OID is not supported in Fabric OS v4.0 through v4.2. This OID is supported in Fabric OS v4.3 and later versions. Possible values are: • unknown (0) - The status of the current Telnet shell task is unknown. • terminated (1) - The current Telnet shell task is deleted. By setting it to 1 (terminated), the current Telnet shell task is deleted. When this variable instance is read, it reports the value last set through SNMP. swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10 Read only The soft serial number of the switch. This variable will return the "ssn" value that is stored in the config database. If the "ssn" key value pair is not in the config database it will return WWN of the switch. Flash administration The next six objects are related to firmware or configuration file management. Due to security restrictions, firmwaredownload and configuration file upload and download are not supported through SNMP. swFlashDLOperStatus Read only 1.3.6.1.4.1.1588.2.1.1.1.1.11 The operational status of the flash. This OID cannot be used for either Firmwaredownload or Configdownload (cannot be set and is read only). The value displayed is always "swCurrent (1)". Fabric OS MIB Reference 143 53-1002750-01