Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 327

Aggregator port group 17 Aggregator port group TABLE 117 object and OID Access Description dot3adAggPortTable Not A table that contains link aggregation control configuration information 1.2.840.10006.300.43.1. accessible about every aggregation port associated with the device. A row appears 2.1 in this table for each physical port. dot3adAggPortEntry Not A list of link aggregation control configuration parameters for each 1.2.840.10006.300.43.1. accessible aggregation port on the device. 2.1.1 dot3adAggPortIndex 1.2.840.10006.300.43.1. 2.1.1.1 Read only The ifIndex of the port. dot3adAggPortActorSyste mPriority 1.2.840.10006.300.43.1. 2.1.1.2 Read-write A 2-octet read-write value used to define the priority value associated with the actor's system ID. dot3adAggPortActorSyste mID 1.2.840.10006.300.43.1. 2.1.1.3 Read only A 6-octet read-only MAC address value that defines the value of the system ID for the system that contains this aggregation port. dot3adAggPortActorAdmin Key 1.2.840.10006.300.43.1. 2.1.1.4 Read-write The current administrative value of the key for the aggregation port. This is a 16-bit, read-write value. The meaning of particular key values is of local significance. dot3adAggPortActorOperK ey 1.2.840.10006.300.43.1. 2.1.1.5 Read only The current operational value of the key for the aggregation port. This is a 16-bit value. The meaning of particular key values is of local significance. dot3adAggPortPartnerAd minSystemPriority 1.2.840.10006.300.43.1. 2.1.1.6 Read-write A 2-octet read-write value used to define the administrative value of priority associated with the partner's system ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. dot3adAggPortPartnerOpe rSystemPriority 1.2.840.10006.300.43.1. 2.1.1.7 Read only A 2-octet read-only value indicating the operational value of priority associated with the partner's system ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol partner. dot3adAggPortPartnerAd minSystemID 1.2.840.10006.300.43.1. 2.1.1.8 Read-write A 6-octet read-write MAC address value representing the administrative value of the aggregation port's protocol partner's system ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. NOTE: This object is not supported. Fabric OS MIB Reference 307 53-1002750-01