Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 357

BD configuration 19 BD configuration The OID represents the Bottleneck configuration. NOTE When alerting is never enabled in the lifetime of the daemon, junk values are expected for alert-related parameters. When alerting is enabled before being disabled, non-junk values are expected for alert-related parameters. TABLE 132 Object and OID Access Description bdStatus Read only 1.3.6.1.4.1.1588.2.1.1.51.1.1 This object represents the status of bottleneck detection feature if enabled in the switch. Valid values: • true (1) • false (2) bdLThreshold Read only 1.3.6.1.4.1.1588.2.1.1.51.1.2 This object is the severity threshold for latency bottleneck. This threshold indicates the percentage of one-second intervals affected by latency conditions within a specified time window. The value of this OID is between 0 and 1. bdCThreshold Read only 1.3.6.1.4.1.1588.2.1.1.51.1.3 This object is the severity threshold for congestion bottleneck. This threshold indicates the percentage of one-second intervals affected by congestion conditions within a specified time window. The value of this OID is between 0 and 1. bdQTime Read only 1.3.6.1.4.1.1588.2.1.1.51.1.4 The minimum number of seconds between consecutive alerts. The value assigned to this parameter applies to both latency and congestion monitoring. In this duration, there will not be any traps sent. bdWinAvgTime Read only 1.3.6.1.4.1.1588.2.1.1.51.1.5 The time window in seconds over which the percentage of seconds affected by bottleneck conditions is computed and compared with the threshold. bdThreshold accessible-for-notify This object represents the threshold for BD. 1.3.6.1.4.1.1588.2.1.1.51.1.6 This is accessible only for bdTrap and bdClearTrap. nBdType accessible-for-notify This object represents the BD type.This is accessible only 1.3.6.1.4.1.1588.2.1.1.51.1.7 for bdTrap and bdClearTrap. BD statistics This OID represents the BD statistics. Fabric OS MIB Reference 337 53-1002750-01