Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 319

LLDP-EXT-DOT3-MIB 16 lldpXdot3 configuration group TABLE 113 object and OID Access Description lldpXdot3Config 1.0.8802.1.1.2.1.5.4623.1.1 Not IEEE 802.3 configuration information. accessible lldpXdot3PortConfigTable Not A table that controls selection of LLDP TLVs to be transmitted on 1.0.8802.1.1.2.1.5.4623.1.1.1 accessible individual ports. lldpXdot3PortConfigEntry 1.0.8802.1.1.2.1.5.4623.1.1.1. 1 Not The LLDP configuration information that controls the transmission accessible of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. lldpXdot3PortConfigTLVsTxEnabl e 1.0.8802.1.1.2.1.5.4623.1.1.1. 1.1 Read-write The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV: • The bit macPhyConfigStatus (0) indicates that LLDP agent should transmit MAC/PHY configuration or status TLV. • The bit powerViaMDI (1) indicates that LLDP agent should transmit Power through MDI TLV. • The bit linkAggregation (2) indicates that LLDP agent should transmit Link Aggregation TLV. • The bit maxFrameSize (3) indicates that LLDP agent should transmit Maximum-frame-size TLV. lldpXdot3 local data group TABLE 114 object and OID Access Description lldpXdot3LocalData 1.0.8802.1.1.2.1.5.462 3.1.2 Not IEEE 802.3 local device information. accessible lldpXdot3LocPortTable 1.0.8802.1.1.2.1.5.462 3.1.2.1 Not This table contains one row per port of Ethernet port information (as a accessible part of the LLDP 802.3 organizational extension) on the local system known to this agent. lldpXdot3LocPortEntry 1.0.8802.1.1.2.1.5.462 3.1.2.1.1 Not The information about a particular port component. accessible lldpXdot3LocPortAutoNe gSupported 1.0.8802.1.1.2.1.5.462 3.1.2.1.1.1 Read only The truth value used to indicate whether the given port (associated with the local system) supports auto-negotiation. lldpXdot3LocPortAutoNe gEnabled 1.0.8802.1.1.2.1.5.462 3.1.2.1.1.2 Read only The truth value used to indicate whether port auto-negotiation is enabled on the given port associated with the local system. Fabric OS MIB Reference 299 53-1002750-01