Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 229

Connectivity unit group 9 TABLE 75 Object and OID Access Description connUnitConfigurationCh Read only angeTime 1.3.6.1.3.94.1.6.1.16 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 connUnitNumZones 1.3.6.1.3.94.1.6.1.18 connUnitModuleId 1.3.6.1.3.94.1.6.1.19 Read only Read only Read only connUnitName 1.3.6.1.3.94.1.6.1.20 Read-write connUnitInfo 1.3.6.1.3.94.1.6.1.21 Read-write The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for any members of the set. In other words, this is the latest time stamp of flash memory update. This represents a union of change information for connUnitConfigurationChangeTime NOTE: This object is not supported. The number of revisions in connUnitRevsTable. Set to 2. Number of zones defined in connUnitZoneTable. NOTE: This object is not supported. This is a unique ID, persistent between boots, that can be used to group a set of connUnits together into a module. The intended use would be to create a connUnit with a connUnitType of "module" to represent a physical or logical group of connectivity units. Then the value of the group would be set to the value of connUnitId for this "container" connUnit. connUnitModuleId should be 0s if this connUnit is not part of a module. Set to the WWN of the switch. A display string containing a name for this connectivity unit. This object value should be persistent between boots. Set to switchName/sysName. A display string containing information about this connectivity unit. This object value should be persistent between boots. For a Fabric switch set to sysDescr and read only. For a Brocade Access Gateway device set to "Access Gateway." Fabric OS MIB Reference 209 53-1002750-01