Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 227

Connectivity unit group 9 TABLE 75 Object and OID connUnitNumports 1.3.6.1.3.94.1.6.1.4 connUnitState 1.3.6.1.3.94.1.6.1.5 connUnitStatus 1.3.6.1.3.94.1.6.1.6 connUnitProduct 1.3.6.1.3.94.1.6.1.7 Access Read only Read only Read only Read only Description Number of physical ports (between 0 and the maximum number of system supported ports) in the connectivity unit (external). The Brocade switches support 0 to maximum number of system supported ports. NOTE: The ConnUnitNumports will not count the GE ports present on the FC4-16IP blade. The maximum number of supported ports are as follows. Brocade 300 24 ports Brocade 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 5100 40 ports Brocade 5300 Brocade 7500 or 7500E Brocade 7600 80 ports 32 ports 16 ports Brocade 7800 Extension Switch 24 ports Brocade 8000 Brocade Encryption Switch Brocade DCX Brocade DCX-4S Brocade 48000 32 ports 32 ports 640 ports 320 ports 384 ports Brocade 6505 24 ports Brocade 6510 Brocade 6520 Brocade DCX 8510-4 Backbone Brocade DCX 8510-8 Backbone 48 ports 96 ports 320 ports 640 ports Brocade VA-40FC 40 ports Overall state of the connectivity unit. Possible values are: • unknown (1) • online (2) - Set the state to online. • offline (3) - Set the state to offline. Mapped as follows: switchState (ONLINE) 2 (online) switchState (not ONLINE) 3 (offline, testing, faulty) Overall status of the connectivity unit. This switch status is based on the most severe status of contributors like Power supplies, Temperatures, Fans, WWN servers, Standby CP, Blades, Flash, Marginal ports, Faulty ports, Missing SFPs, and so on. switchStatusPolicyShow command displays the policy parameters that determines the overall switch status. Possible values are: • unknown (1) - Unknown • unused (2) - Unmonitored • ok (3) - Healthy/ok • warning (4) - Marginal/Warning • failed (5) - Down/Failed The connectivity unit vendor's product model name. This is the same as for sysDescr (set for as many as 79 bytes). If the switch is in Access Gateway mode, the default value is Access Gateway. Fabric OS MIB Reference 207 53-1002750-01