Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 244

9 Connectivity unit group TABLE 75 Object and OID connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 Access Read only connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 Read only connUnitLinkPortNumbe Read only rX 1.3.6.1.3.94.1.12.1.4 connUnitLinkPortWwnX Read only 1.3.6.1.3.94.1.12.1.5 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 Read only connUnitLinkPortNumbe Read only rY 1.3.6.1.3.94.1.12.1.7 connUnitLinkPortWwnY Read only 1.3.6.1.3.94.1.12.1.8 connUnitLinkAgentAddre Read only ssY 1.3.6.1.3.94.1.12.1.9 connUnitLinkAgentAddre Read only ssTypeY 1.3.6.1.3.94.1.12.1.10 connUnitLinkAgentPortY Read only 1.3.6.1.3.94.1.12.1.11 Description This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value is allowed to wrap at the highest value represented by the number of bits. This value is reset to 0 when the system is reset and the first value to be used is 1. Indexes 1 through maximum number of ports is reserved for ISL. Indexes maximum number of ports + 1 and above are reserved for end devices and are calculated based on portID of the end devices. The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a connUnit in the responding agent, then the value of this object must be equal to its connUnitID. WWN of the local switch. The port number on the unit specified by connUnitLinkNodeIdX, if known; otherwise, -1. If the value is nonnegative, then it is equal to connUnitPortPhysicalNumber. ISL- Physical port number of the E_Port. Device- Physical port # to which the device is connected. The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16 octets of binary 0. This is the WWN of the port to which the device is connected. The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID. ISL- WWN of the remote switch. Device- Node name of the device. The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1. If the value is nonnegative then it is equal to connUnitPortPhysicalNumber. ISL- Physical port number of the remote port. Device: -1. The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of binary 0. ISL- WWN of the remote port. Device- Port name. The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of binary 0. ISL- IP address (IPv4). Device- 0 (Null). If connUnitLinkAgentAddressY is nonzero, it is a protocol address. connUnitLinkAgentAddressTypeY is the "address family number" assigned by IANA to identify the address format (for example, 1 is Ipv4, 2 is Ipv6). ISL- Type 1. Device- 0 (Null). The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. ISL- IP port. Device- 0 (Null). 224 Fabric OS MIB Reference 53-1002750-01