Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 172

6 Fibre Channel port group TABLE 49 Object and OID Access Description swAgtTrapRcp Read-write 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.3 swAgtTrapSeverityLevel Read-write 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.4 This is the trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community string. Any or all of the trap recipients can be configured to send a trap for the associated community string. The maximum number of trap recipients that can be configured is six. If no trap recipient is configured, no traps are sent. The trap recipient IP address should be part of the Access Control List for Fabric OS v2.6.1, v3.1, and v4.x (refer to the Fabric OS Command Reference and the snmpConfig command for more information). This is the trap severity level associated with "swAgtTrapRcp". The trap severity level, is in conjunction with the event's severity level. When an event occurs, and if its severity level is at or below the set value, the SNMP trap is sent to configure trap recipients. The severity level is limited to particular events. If a new value is set successfully, it takes effect immediately. This object obsoletes "swEventTrapLevel". Fibre Channel port group This group contains information about the physical state, operational status, performance, and error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which supports the Fibre Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port. TABLE 50 Object and OID Access Description swFCport 1.3.6.1.4.1.1588.2.1.1.1.6 Not The OID sub-tree for Fibre Channel port group. accessible swFCPortCapacity Read only The maximum number of Fibre Channel ports on this switch. It 1.3.6.1.4.1.1588.2.1.1.1.6.1 includes G_Port, F_Port, FL_Port and any other types of Fibre Channel port. swFCPortTable Not A table that contains one entry for each switch port, configuration and 1.3.6.1.4.1.1588.2.1.1.1.6.2 accessible service parameters of the port. swFCPortEntry Not An entry containing the configuration and service parameters of the 1.3.6.1.4.1.1588.2.1.1.1.6.2 accessible switch port. .1 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.1 Read only The switch port index. The value of swFCPortIndex is 1 higher than the actual port index. For example, a swFCPortIndex of 1 corresponds to the actual port index of 0. 152 Fabric OS MIB Reference 53-1002750-01