Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 252

9 SNMP trap registration group SNMP trap registration group TABLE 79 Object and OID trapMaxClients 1.3.6.1.3.94.2.1 trapClientCount 1.3.6.1.3.94.2.2 trapRegTable 1.3.6.1.3.94.2.3 trapRegEntry 1.3.6.1.3.94.2.3.1 trapRegIpAddress 1.3.6.1.3.94.2.3.1.1 trapRegPort 1.3.6.1.3.94.2.3.1.2 trapRegFilter 1.3.6.1.3.94.2.3.1.3 trapRegRowState 1.3.6.1.3.94.2.3.1.4 Access Read only Read only Description The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. The current number of rows in the trap table. Not accessible A table containing a row for each IP address or port number to which traps are sent. Not accessible IP/port pair for a specific client. Read only The IP address of a client registered for traps. Read only Read-write Read-write The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table. Set to 162. This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that have a severity level less than or equal to this value. The default value of this object is Warning. The mapping between errorlog severity level and this variable is shown in Table 80. For severity level, refer to "FcEventSeverity" in Table 74 on page 203. The values 1, 3, 7, and 10 are not valid for SET operations. Specifies the state of the row. This entry always returns rowActive and allows for read only. For the state of the row, refer to Table 81. :TABLE 80 trapRegFilter for errorlog severity level System Error Log errshow command FA-MIB none (0) Critical (1) Error (2) Warning (3) Info (4) Debug (5) unknown (1) critical (4) error (5) warning (6) info (8) debug (9) 232 Fabric OS MIB Reference 53-1002750-01