Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 82

3 History group TABLE 19 Object and OID Access etherStatsPkts512to102 Read only 3Octets 1.3.6.1.2.1.16.1.1.1.18 etherStatsPkts1024to15 Read only 18Octets 1.3.6.1.2.1.16.1.1.1.19 etherStatsOwner Read-write 1.3.6.1.2.1.16.1.1.1.20 etherStatsStatus Read-write 1.3.6.1.2.1.16.1.1.1.21 Description The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). The entity that configured this entry and is therefore using the resources assigned to it. The status of this etherStats entry. History group History control group TABLE 20 Object and OID history 1.3.6.1.2.1.16.2 historyControlTable 1.3.6.1.2.1.16.2.1 historyControlEntry 1.3.6.1.2.1.16.2.1.1 historyControlIndex 1.3.6.1.2.1.16.2.1.1.1 Access Not accessible Not accessible Not accessible Read only historyControlDataSourc e 1.3.6.1.2.1.16.2.1.1.2 Read-write historyControlBucketsRe quested 1.3.6.1.2.1.16.2.1.1.3 Read-write historyControlBucketsGr anted 1.3.6.1.2.1.16.2.1.1.4 Read only historyControlInterval 1.3.6.1.2.1.16.2.1.1.5 Read-write Description A list of parameters that set up a periodic sampling of statistics. History is collected using the rmon collection history command. A list of history control entries. A list of parameters that set up a periodic sampling of statistics. An index that uniquely identifies an entry in the historyControl table. Each entry defines a set of samples at a particular interval for an interface on the device. This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on the device. The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. The number of discrete sampling intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). The default value is 1800. 62 Fabric OS MIB Reference 53-1002750-01