Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 173

Fibre Channel port group 6 TABLE 50 Object and OID Access Description swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.2 Read only The type of ASIC for the switch port. Possible values are: • stitch (1) • flannel (2) • loom (3) (Brocade 2000 series) • bloom (4) (Valid value for Brocade 3250, 3850, 3900, 12000, 24000) • rdbloom (5) • wormhole (6) • other (7) (Valid value for Brocade 200E, 4012, 4100, 4900, 7500, 7600, 48000, 300, 5100 and 5300) • unknown (8) swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.3 Read only The physical state of the port. Possible values are: • noCard (1) - No card is present in this switch slot. • noTransceiver (2) - No Transceiver module in this port (Transceiver is the generic name for GBIC, SFP, and so on). • laserFault (3) - The module is signaling a laser fault (defective GBIC). • noLight (4) - The module is not receiving light. • noSync (5) - The module is receiving light but is out of sync. • inSync (6) - The module is receiving light and is in sync. • portFault (7) - The port is marked faulty (defective GBIC, cable, or device). • diagFault (8) - The port failed diagnostics (defective G_Port or FL_Port card or motherboard). • lockRef (9) - The port is locking to the reference signal. • validating (10) - The module is being validated. • invalidModule (11) - The module is invalid. • noSigDet (14) - No Signal is detected in the port. • unknown (255) - The module is unknown. swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.4 Read only The operational status of the port. Possible values are: • unknown (0) - The port module is physically absent. • online (1) - User frames can be passed. • offline (2) - No user frames can be passed. • testing (3) - No user frames can be passed. • faulty (4) - The port module is physically faulty. swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.5 Read-write The desired state of the port. A management station might place the port in a desired state by setting this object accordingly. Based on the port status, this OID returns one of the following: • Online - When queried port is online. • Offline - When queried port is offline. • Faulty - When port is in faulty state. The following values can be used to set this object: • Online - To change port's state to Online. • Offline - To change port's state to Offline. Fabric OS MIB Reference 153 53-1002750-01